522136
26
Zoom out
Zoom in
Previous page
1/47
Next page
19
NAV DATA-1, -2: Choose the number of
navigation data items to display on the nav
data displays, from two, three or four items.
Requires appropriate nav data.
KEY BEEP: Turn key beep on or off.
BATT VOLTAGE: Turn the battery voltage
indication (appears at the top right corner
on the screen) on or off. When on it
replaces the picture advance speed
indication.
Page 2
NAV DISPLAY: Choose the nav data to
display in the nav data window at the top
left-hand corner. You may choose from
temperature/speed, latitude/longitude,
range and bearing, course over ground, trip
distance or wind speed. Requires
appropriate nav data.
40.7°F
16.2kt
Nav window (water temperature and speed)
NMEA0183: Choose NMEA version of
navigator; Ver. 1.5, Ver. 2.0 or Ver. 3.0.
TLL OUTPUT: Enables/disables output of
TLL (Target Latitude, Longitude) position
when the [MARK] key is operated. “TLL”
outputs latitude and longitude position.
“FURUNO-TLL,” available with connection
of navigator that can output FURUNO TLL,
outputs latitude and longitude, water
temperature, depth, etc.
BEARING: Ships course and bearing to a
waypoint may be displayed in true or
magnetic bearing. Magnetic bearing is true
bearing plus (or minus) earth’s magnetic
deviation. Requires bearing data.
WIND SPD/DIR: Choose the wind speed
and direction reference from true and
apparent. Requires wind sensor.
Apparent: The direction (in relation to
ship’s bow) and speed of the wind as it
appears to those on board, relative to the
speed and direction of the boat;
combination of the true wind and the wind
caused by the boat's movement.
True: The speed and direction (in relation
to ship’s bow) of the wind felt or measured
when stationary.
TRIP SOURCE: Choose speed source for
the trip distance indication; Own
(transducer w/speed sensor or separate
speed sensor) or NMEA.
TEMP SOURCE: Choose source of water
temperature input; Off, Own (transducer
w/water temperature sensor or separate
temperature sensor), or NMEA.
SPEED SOURCE: Choose source of speed
input; Off, Own (transducer w/speed sensor
or separate speed sensor), or NMEA.
Requires speed data.
TEMP CALIB.: If the water temperature
sensor-generated water temperature
indication is wrong, you can correct it here,
when “Own” is selected as temperature
source. For example, if the water
temperature indication is 2° higher than
actual water temperature, enter -2. The
setting range is -40°F to +40°F.
SPEED CALIB.: If the speed
sensor-generated speed indication is wrong,
you can correct it here, when “Own” is
selected as speed source. For example, if
the speed indication is 10% lower than
actual speed, enter +10. The setting range
is –50% to +50%.
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LS-6100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LS-6100 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info