530568

Funai DPVR-4110 Manual

11
Zoom out
Zoom in
Previous page
1/28
Next page
11 EN
<Note for “Speed Search” and “Still Picture”>
• Usually there will be video “noise” lines (black and white
streaks or dots) on the screen. This is normal.
The still picture will, in addition to containing the “noise”
lines, be black and white.
This is not a fault of the unit but merely a by-product of
the technology involved in producing a DVD/VCR with
LP mode.
Slow Motion
•Press PAUSE F
, then g to reduce the playback speed.
The unit mutes the sound during slow motion. You can
control the speed by pressing
g (faster) or h (slower).
Press
PLAY B to return to normal playback.
• If it is left in the Slow mode for more than 5 minutes, the
unit will automatically switch to the Stop mode.
Auto Repeat Playback
The unit has an auto repeat function that allows you to repeat
a tape indefinitely without touching
PLAY B.
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1) Press
VCR, then SETUP.
2) Press
K or L to select “SET UP”, then press B.
3) Press
K or L to select “AUTO REPEAT”.
4) Press
B so that “ON” appears next to “AUTO REPEAT”
on the TV screen.
•When in Stop mode, Auto Repeat mode will start
automatically.
•If the on-screen menu still remains, press
SETUP to exit,
then press
PLAY B.
Note: • Once you select the Auto Repeat mode, it stays in
effect even after you turn off the unit.
To Stop Playback
Press STOP C.
To Exit the Auto Repeat Mode
Repeat steps 1) to 3). Then, press B.
“OFF” will appear next to “AUTO REPEAT” on the TV
screen. Press
SETUP to exit.
Picture Select
This function enables you to select the picture quality of a
tape.
• Use the remote control for this procedure.
1) Press
VCR, then SETUP.
2) Press
K or L to select “SET UP”, then press B.
3) Press
K or L to select “PICTURE”.
4) Press
B until the desired mode (NORMAL, SOFT or
SHARP) is indicated on the TV screen.
5) Press
SETUP to exit.
Note: • Once you select the Picture Select mode, it stays in
effect even after you turn off the unit.
Auto Return
When Timer Recording is finished, the unit will automatically
rewind the tape to the beginning where it started recording.
If there are any remaining programmes including Daily,
Everyday or Weekly, Auto Return will not operate.
1) Press
VCR, then SETUP.
2) Press
K or L repeatedly to point to “SET UP”, then press
B.
3) Press
K or L to point to “AUTO RETURN”, then press
B.
“ON” will appear next to “AUTO RETURN”.
4) Press
SETUP.
Watch the Recorded Timer Programme
Press T-SET to turn on the unit and press VCR, then press
PLAY B.
Index Search
This function enables you to search the beginning of the
desired programme recorded an index mark.
• The index mark will be made automatically when
REC/OTR is pressed. It will also be marked at the starting
point of Timer Recording and OTR.
• The index mark is not recorded if
PAUSE F is pressed and
released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
• Use the remote control for this procedure.
1) Press
VCR, then SEARCH.
2) Press K or L repeatedly until the number of programmes
that you want to skip appears.
3) Press
s or B to start Index Search.
•The unit begins rewinding or fast forwarding to the
beginning of desired programme. When the preset
programme is reached, the unit will start playback
automatically.
Note: • Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds
from steps 2) to 3), otherwise the Index Search mode
will be cancelled.
• To exit the Index Search mode, press SETUP in step 2)
or press STOP C after step 3).
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO REPEAT
[
ON
]
PICTURE
[
NORMAL
]
AUTO RETURN
[
ON
]
MENU
TIMER
SET UP
INITIAL
MENU
TIMER
SET UP
INITIAL
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO REPEAT
[
ON
]
PICTURE
[
NORMAL
]
AUTO RETURN
[
ON
]
E8G06ED(EN).fm Page 11 Friday, July 27, 2007 8:51 PM
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai DPVR-4110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai DPVR-4110 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai DPVR-4110

Funai DPVR-4110 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info