530568

Funai DPVR-4110 Manual

9
Zoom out
Zoom in
Previous page
1/28
Next page
9 EN
Channel Presetting
Tuning of broadcast channels not already preset in the unit
can be performed in two ways.
Automatic Channel Preset
• By “AUTOMATICALLY” tuning channels and placing
them in sequential order in the unit’s memory i.e. the first
channel found will be memorised into the unit’s channel
position 1, the second channel found will be memorised
into the unit’s channel position 2 and so on.
• Execution of the “Automatic” channel presetting cancels all
the preset channels. DO NOT use this feature if you intend
to use some of the pre-tuned channels. Use the “Manual”
channel presetting function to tune in the additional
channels you require.
Manual Channel Preset
• Each channel is tuned manually and individually. Follow
the steps laid out in the “Manual Channel Preset”.
Automatic Channel Preset
You can programme the tuner to scan only the channels that
you can receive in your area.
• Use the remote control for this procedure.
1) Turn on the TV and select the TV channel to the video
channel on the TV.
2) Press
VCR, then SETUP.
3) Press
K or L to select “INITIAL”, then press B.
4) Press
K or L to select “CH TUNING”, then press B.
5) Press
K or L to select “AUTO”, then press B.
•The tuner scans and memorises all the active channels in
your area. After scanning, the tuner stops on the lowest
memorised channel.
To Select a Desired Channel
You can select a desired channel by using CHANNEL (K/L), or
directly pressing
the Number buttons on the remote control.
• Enter a channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press
0
and
6. If you only press 6, channel 6 will be selected after a
brief delay.
• You can only select channels 01–99.
Manual Channel Preset
• Use the remote control for this procedure.
1) Press
VCR, then SETUP.
2) Press
K or L to select “INITIAL”, then press B.
3) Press
K or L to select “CH TUNING”, then press B.
4) Press
K or L to select “MANUAL”, then press B.
5) Press
K or L to select “POSITION”, then press B.
•When a weak signal is received in Manual Tuning mode,
you can change the background to solid blue or the
static screen by pressing
C.RESET.
6) Press
the Number buttons, K or L to select your desired
position number, then press
B.
•You can select position number 01-99.
•If “ON” appears on the right side of “SKIP”, press
K or
L to point to “SKIP”. Then, press B to select “OFF”.
•If you want to remove scrambled signals, press
K or L
repeatedly to point to “DECODER”. Then, press
B to
select “ON”.
7) Press
K or L to select “CHANNEL”, then press B.
8) Press
K or L to start scanning.
•The unit’s tuner will begin to search up or down
automatically. When a channel is found, the unit will
stop searching and the picture will appear on the TV
Screen.
•You can select desired channel number by using
the Number buttons. You must refer to the following
Channel Plan table and press three digits to select the
channel number.
(To select channel 24, press “
0” button first and then
press “
2” and “4”.)
•If this is the channel you want, press
B.
This unit can receive Hyper and Oscar frequency bands.
9) Press
SETUP to exit.
Note: • To confirm that a channel has been added, press
CHANNEL (K/L).
To Skip a Preset Channel
The channels you can no longer receive or seldom watch can
be set to be skipped when you access channels by pressing
CHANNEL
(K/L).
• Use the remote control for this procedure.
1) Press
VCR, then SETUP.
2) Press
K or L to select “INITIAL”, then press B.
3) Press
K or L to select “CH TUNING”, then press B.
4) Press
K or L to select “MANUAL”, then press B.
5) Press
K or L to select “POSITION”, then press B.
6) Press
the Number buttons, K or L to select relevant
position number, then press
B.
INITIAL
CH TUNING
CLOCK
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
scanning
MENU
TIMER
SET UP
INITIAL
Channel Plan
CH Indication TV Channel
02 – 12 E2 – E12
13 – 20 A – H (only ITALY)
21 – 69 E21 – E69
74 – 78 X, Y, Z, Z+1, Z+2
80 – 99,100 S1 – S20,GAP
121 – 141 S21 – S41
INITIAL
CH TUNING
CLOCK
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P08
008
[OFF]
[OFF]
MENU
TIMER
SET UP
INITIAL
E8G06ED(EN).fm Page 9 Friday, July 27, 2007 8:51 PM
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai DPVR-4110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai DPVR-4110 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai DPVR-4110

Funai DPVR-4110 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info