530568
10
Zoom out
Zoom in
Previous page
1/28
Next page
10 EN
7) Press K or L to select “SKIP”, then press B to select
“ON”.
To memorise the channel again, press
B. “ON” will
change to “OFF”.
8) Press SETUP to exit.
Note: To confirm that a channel has been deleted, press
CHANNEL (K/L).
Channel Reprogramming
You can replace two channels.
Use the remote control for this procedure.
1) Press VCR, then SETUP.
2) Press
K or L to select “INITIAL”, then press B.
3) Press
K or L to select “CH TUNING”, then press B.
4) Press
K or L repeatedly to select “MOVE”, then press B.
5) Press
K or L repeatedly to select the position number you
want to change the channel, then press
B.
You cannot select a position number where “- - -”
appears next to the number. This is because “SKIP” is
set to “ON” for this position number.
When a weak signal is received in Channel
Reprogramming mode, you can change the background
to solid blue by pressing
C.RESET.
If you press
C.RESET again, the background will return
to the static screen.
6) Press
K or L repeatedly until the channel move to another
position number, then press
B.
7) Press
SETUP to exit.
VCR Operation
VCR Features
Ensure that all VCR setting begins in VCR mode by pressing
VCR. (Make sure that the VCR OUTPUT indicator is lit.)
Playback
1) Turn on the TV and select the video channel on the TV.
2) Insert a pre-recorded tape.
The unit will turn on automatically. If the erase-
prevention tab has been removed, the unit will start
playback automatically.
If the unit’s power was already on, press
VCR to switch
to VCR mode.
3) If playback does not start automatically, press
VCR, then
press
PLAY B.
<If a tape is already in the unit...>
Using the buttons on the unit
Just press
PLAY B on the unit. Power will automatically
turn on and playback will start. (Direct Button
Operation)
Using the buttons on the remote control
Press
STANDBY-ON to turn on, and then press PLAY B.
4) Press
STOP C to stop playback.
Tracking Adjustment
Tracking adjustment will be activated automatically
(Digital Tracking function) when you start playback.
When playing pre-recorded tapes or tapes recorded on the
units other than your own, noise lines (black and white
streaks) may appear on the playback picture. If this occurs,
you can adjust the tracking control manually by pressing
CHANNEL (K/L) until the streaks disappear. To return to
the DTR function, stop the tape once and start playback
again.
You can reduce the noise lines by pressing
CHANNEL (K/L)
in Slow mode, too. Slow tracking adjustment is not set
automatically.
In the Still mode, press
g, and press CHANNEL (K/L)
until the streaks disappear. To return to the Still mode,
press
PAUSE F again.
Speed Search
1) Press g or h during playback to view a videotape at a
high speed in either a forward or reverse direction. In this
mode, the sound will be muted.
2) Press the button again, the unit will now search in super
high speed. (This function will not operate for a NTSC
tape.)
3) Press PLAY B to return to normal playback.
Still Picture
Press PAUSE F during playback to view a still picture on the
TV screen.
When the picture begins to vibrate vertically, stabilize the
picture by pressing
CHANNEL (K/L) in the Still mode.
After the unit has been in Still mode for 5 minutes, it will
stop automatically to protect the tape and the video head.
INITIAL
CH TUNING
CLOCK
LANGUAGE
MANUAL
POSITION
CHANNEL
DECODER
SKIP
P08
008
[OFF]
[ON]
CH TUNING
AUTO
MANUAL
MOVE
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
MOVE
P01:
P02:
P03:
P04:
P05:
02
03
04
05
06
P06:
P07:
P08:
P09:
P10:
07
08
09
10
11
Position
Number
Channel
Number
[ ]
MOVE
P01:
P02:
P03:
P04:
P05:
02
03
11
05
06
P06:
P07:
P08:
P09:
P10:
07
08
09
10
04
[ ]
MENU
TIMER
SET UP
INITIAL
MOVE
P01:
P02:
P03:
P04:
P05:
02
03
11
05
06
P06:
P07:
P08:
P09:
P10:
07
08
09
10
04
E8G06ED(EN).fm Page 10 Friday, July 27, 2007 8:51 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai DPVR-4110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai DPVR-4110 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai DPVR-4110

Funai DPVR-4110 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info