530568
8
Zoom out
Zoom in
Previous page
1/28
Next page
8 EN
Video Cassette Tape
This unit will operate with any cassette that bears the VHS
mark. For best results, we recommend the use of high-quality
tapes. Do not use poor quality or damaged tapes.
You can prevent accidental erasing of a recording by
breaking off the erase-prevention tab on the back edge of
the cassette.
If you decide to record on the tape again, cover the hole
with plastic tape.
TV Colour System
Different countries use different television colour systems.
Tapes recorded in the PAL or NTSC system can be played
back on this unit. Usually, the picture on the TV screen will
be in black and white when you play back a tape that is
recorded in a different colour system.
Tapes recorded in the NTSC system can be played back on
this unit and a PAL system TV set. This feature is only
available in the SP mode. When playing back such tapes, the
picture may roll up or down, shrink vertically and black bars
may appear both at the top and bottom of the screen. Adjust
the vertical hold control on your TV, if the TV features this
control.
Turning on Your DVD/VCR
The following steps should only be performed if there is a
power failure or if this unit is unplugged for more than 30
seconds.
Use the remote control for this procedure.
1) Turn on the TV and select the video channel on the TV.
2) Press
STANDBY-ON, then VCR.
3) Press
K or L repeatedly to select your desired language.
4) Press
SETUP.
Changing the Language
If you want to change the language used on the TV screen
menus, follow the steps below.
Use the remote control for this procedure.
1) Press
VCR, then SETUP.
2) Press
K or L to select “INITIAL”, then press B.
3) Press
K or L to select “LANGUAGE”, then press B.
4) Press
K or L repeatedly to select your desired language.
5) Press
SETUP.
Setting the Clock
This unit incorporates a 24-hour clock. The clock must be set
for the Timer Recording function to operate correctly.
Use the remote control for this procedure.
1) Press
VCR, then SETUP.
2) Press
K or L to select “INITIAL”, then press B.
3) Press
K or L to select “CLOCK”, then press B.
4) Press
K or L until the relevant year appears, then press B.
5) Press
K or L until the relevant month appears, then press
B.
6) Press
K or L until the relevant day appears, then press B.
7) Press
K or L until the relevant hour appears, then press B.
8) Press
K or L until the relevant minute appears.
9) Press
SETUP to start the clock.
Note: Press s to go back to the item you want to correct
during steps 5) to 8).
Although seconds are not displayed, they begin
counting from 00 when you exit by pressing SETUP.
Use this feature to synchronize the clock with the
correct time.
If this unit is unplugged or if there is a power failure
for more than 30 seconds, you may have to reset the
clock.
Ta b
LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
NEDERLANDS
[ ]
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
LANGUAGE
LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
NEDERLANDS
[ ]
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
LANGUAGE
CLOCK
YEAR 2 0 0 7
MONTH 0 1
DAY 0 1 MO
HOUR
_ _
MINUTE
_ _
E8G06ED(EN).fm Page 8 Friday, July 27, 2007 8:51 PM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai DPVR-4110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai DPVR-4110 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai DPVR-4110

Funai DPVR-4110 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info