530568

Funai DPVR-4110 Manual

13
Zoom out
Zoom in
Previous page
1/28
Next page
13 EN
Timer Recording
You may programme the unit to start and end a recording
while you are away. You can set 8 programmes to record on
specific days, daily or weekly within a 1-year period.
• Use the remote control for this procedure.
• Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point at
which you want to begin recording.)
1) Press
VCR, then SETUP.
2) Press K or L to select “TIMER”, then press B.
Note: • If you have not set the clock yet, “CLOCK” setting
menu appears. If so, follow the steps outlined in the
“Setting the Clock”. (Refer to page 8.) Then, set the
timer.
•When you press
B after pressing K or L during steps 3) to
7), the input mode will move to the next item.
• If you do not press B within 5 seconds of setting an item,
the input mode will move to the next item.
•Press
s to go back to the previous item from the current
setting during steps 4) to 8). If s is pressed when the
TIMER NUMBER is flashing, the entire programme
contents will be erased.
3) Programme number flashes. Press
K or L repeatedly until
the desired programme number appears. Then, press
B.
4) Select once, daily, everyday or weekly recording.
For once-only recording: Press K or L repeatedly until
the relevant month appears, and then press
K or L
repeatedly until your desired day appears.
For daily recording: To record a TV programme at the
same time on the same channel from Monday through
Friday. While the month digit is flashing, press
K or L
repeatedly to select “MO-FR”.
For everyday recording: To record a TV programme at
the same time on the same channel everyday. While the
month digit is flashing, press
K or L repeatedly to select
“MO-SU”.
For weekly recording: To record a TV programme at the
same time on the same channel every week. While the
month digit is flashing, press
K or L repeatedly to select
“W-MO” (example: every Monday).
5) Press
K or L repeatedly until the relevant start hour
appears. Next, enter the minute digit.
6) Press
K or L repeatedly until the relevant end hour
appears. Next, enter the minute digit.
7) Press
K or L repeatedly until the relevant channel number
appears.
8) Press
K or L repeatedly until the desired tape speed
appears.
9) Press
B. Programme is now completed.
•To set another timer programme, repeat steps
3) to 9).
10)Press
SETUP to exit.
11)Press
T-SET to activate a Timer Recording.
•If the unit switches to the DVD mode after pressing
T-SET, the indicator will not appear. The
indicator will appear when the unit is turned off by
pressing
STANDBY-ON.
•If the unit is turned off after pressing
T-SET, the
indicator will appear.
To Stop a Timer Programme Which Has Already
Started
Press STOP/EJECT on the unit.
Note: • STOP C on the remote control will not function in the
Timer Recording mode.
To Correct Timer Programmes
If the unit is already in timer standby mode, press
STOP/EJECT on the front panel or T-SET on the remote
control to exit from the standby mode.
1) Repeat steps 1) to 3) in the “Timer Recording”.
2) Select the setting you want to change using s or B.
3) Enter the correct numbers using
K or L, then press B.
4) Press
SETUP to exit.
5) Press T-SET to return to timer standby mode.
To Cancel or Check the Start/End Time
If the unit is already in timer standby mode, press
STOP/EJECT on the front panel or T-SET on the remote
control to exit from the standby mode.
1) Repeat steps 1) to 2) in the “Timer Recording”.
2) Select the programme number you want to check using K
or
L. The details of selected programme appears on the
TV screen. You may cancel the entire programme by
pressing
s.
3) Press
SETUP to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Hints for OTR and Timer Recording
•Press
VCR on the remote control before you set Timer
Recording. Make sure the unit is in the VCR mode, then
press T-SET.
• If a tape is not in the unit or does not have the erase-
prevention tab, the indicator flashes and Timer
Recording cannot be performed. Please insert a recordable
tape.
• When Timer Recordings are set, the indicator will
appear. To use the VCR as usual until the time for the
recording, press
T-SET so that the indicator disappears.
Select either VCR or DVD mode, then continue with the
other features as described in this manual.
After an OTR and a Timer Recording has been set,
this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is
finished, the unit ejects the tape and switches to the DVD
mode automatically. If the DVD power is off, the unit does
not switch to the DVD mode but goes into the timer
standby mode. Press
T-SET on the remote control or
STOP/EJECT on the unit, then press VCR to activate the
VCR function again.
• Once the unit turns to the timer standby mode, no VCR
functions are available until
T-SET is pressed. (OUTPUT on
the front panel and
VCR on the remote control will not
function.)
• To cancel the timer standby mode, press T-SET on the
remote control or
STOP/EJECT on the unit, then press
VCR to activate the VCR function again.
•Press
VCR or DVD on the remote control to select your
desired mode before you operate.
MENU
TIMER
SET UP
INITIAL
TIMER NUMBER
1
START
END
DATE
CHANNEL
SPEED
--/--
--:--
--:--
--
--
9:00 10:00 11:00
Programme 1
Programme 2
Programme 3
E8G06ED(EN).fm Page 13 Friday, July 27, 2007 8:51 PM
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai DPVR-4110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai DPVR-4110 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Funai DPVR-4110

Funai DPVR-4110 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info