Manual Fratelli Onofri YP 192.C50 (page 32 of 36) (English, German, Dutch, French)

76886

Zoom out

Zoom in

1/36

INSTRUCTIONS FOR USE OF CONTROL DEVICES

(ACCORDING TO THE MODELS)

Setting

To set, press and release the desired function, and within 5 seconds

set the time with + and - buttons.

+ and - buttons.

The + and - buttons increase or decrease the time at a speed depending

on how long the button is pressed.

Setting the time

Press the manual button at the same time, and + or - button to set

the desired time. This deletes any previously set programme. The

contacts are switched off .

Manual use

By pressing the manual button the relay contacts switch on, the AUTO

symbol switches off and the saucepan symbol lights up.

Manual operation can only be enabled after the automatic programme

is over or it has been cancelled.

Automatic use

Press the cooking time or end time button to switch automatically from

the manual to the automatic function.

Semi-automatic use with cooking time setting

Press the cooking time button and set the desired time with + or -.

The AUTO and cooking time symbols light up continuously. The relay

switches on immediately. When the cooking end time corresponds to

the time of day, the relay and cooking time symbol switch off, the

sound signal rings and the AUTO symbol flashes.

Semi-automatic use with end time setting

Press the end time button. The time of day appears on the display.

Set the cooking end time with + button. The AUTO and cooking time

symbols light up continuously. The relay contacts switch on. When

the cooking end time corresponds to the time of day, the relay and

the cooking time symbol switch off. When the cooking time is up, the

AUTO symbol flashes, the sound signal rings and both the relay and

the cooking time button switch off.

Automatic use with cooking time and end time setting

Press the cooking time button and select the length of the cooking

time with + or - button. The AUTO and cooking time symbols light up

continuously. The relay switches on. By pressing the cooking end

time button the next cooking end time appears on the display. Set the

cooking end time with + button. The relay and the cooking time symbol

switch off.

The symbol lights up again when the time of day corresponds to the

cooking start time. When the cooking time is up, the AUTO symbol

flashes, the sound signal rings, the cooking time symbol and the relay

switch off.

ELECTRONIC TIMER FOR COOKER (Fig. 10)

Functions

The display flashes.

Time setting

Press the left button.

Set the time with buttons + and -.

This function remains activated 7 seconds after the last +/- operation.

Timer setting

This function is permanently activated and it will be immediately set

with +/- buttons.

During setting the units are 10 seconds.

During count down the timer takes priority on the display.

The units are seconds.

The maximum time is 99 minutes.

The relay contact (when available) is closed during the count down

only.

Reset timer

Press + and - buttons together and release + button first.

Minutes counter

Press the minutes counter button and set the cooking time with + or

- button.

The bell symbol lights up when the minutes counter is operating.

When the set time is up, the sound signal rings and the bell symbol

switches off.

Sound signal

The sound signal starts at the end of a programme or of the minutes

counter function and it lasts for 15 minutes.

To stop it, push any one of the functions buttons.

Start programme and check

The programme starts 4 seconds after it has been set.

The programme can be checked at any time by pressing the

corresponding button.

Setting error

A setting error is made if the time of day on the clock falls within the

cooking start and end times.

To correct the setting error, change the cooking time or cooking end

time.

The relays switch off when a setting error is made.

Cancelling a setting

To cancel a setting, press the cooking time button and then press the

- button until 00 00 appears on the display.

A set programme will automatically cancel on completion.

Fig. 9

100

110

120

stop

Fig. 8

LED PROGRAMMER (Fig. 7)

Features

24 hours clock with automatic programme and minutes counter.

Functions

Cooking time, cooking end time, manual position, clock,

minutes counter, times to be set up to 23 hours 59 minutes.

Display

4-figures, 7-segments diplay for cooking times and time of day.

Cooking time and manual function = saucepan symbol

Automatic function = AUTO

Minutes counter = bell symbol

The symbols light up when the corresponding functions are selected.

MINUTES COUNTERS (Fig.8)

Turn the knob clockwise to set the desired cooking time.

The minutes minder can be adjusted from 1 to 60 minutes.

A sound signal will inform you that the chosen time is up.

PROGRAMMER WITH COOKING END TIME (Fig.9)

For a manual operation of the programmer, turn the knob anticlockwise

to .

Adjust the cooking time by turning the knob clockwise.

Select the cooking time with the relevant knob (max.120 min.).

The oven will switch off automatically when the cooking is up.

Fig. 7

Minute timer

Cooking time

Cooking end

Manual

Subtract time

Add time

The gas button close the fire trough operation.
All the other 3 working well

Thanks Charlie +972 528898704 Submitted on 22-3-2022 at 16:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fratelli Onofri YP 192.C50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fratelli Onofri YP 192.C50 Manual

Product: