Manual Fratelli Onofri YP 192.C50 (page 33 of 36) (English, German, Dutch, French)

76886

Zoom out

Zoom in

1/36

Fig. 10

1 Time of the day

2 Timing and insertion

3 Signal timing and

insertion

Signal

The signal after time out will stay 7 minutes if it has not been reset

with the + button (one touch only).

Signal frequency

When the display shows the time of day, the signal frequency can be

selected by pressing the - button. Three different frequencies are

selectable.

Before cleaning the appliance

, disconnect the gas general tap

and unplug the appliance or disconnect power at the main circuit

breaker of the electrical system.

Do not clean the appliance surfaces when still hot.

Do not use steam cleaners to clean the oven.

ENAMELLED SURFACES

Clean with a damp sponge using soap and water.

Grease can be easily removed using hot water or a specific cleansing

agent for enamelled surfaces. Do not use abrasive cleansers.

Do not leave any acid or alkaline substances (lemon juice, vinegar,

salt, etc.) on the enamel.

Clean the parts in stainless steel with specific cleansers for stainless

steel surfaces.

These detergents must be applied using a soft cloth.

GLASS-CERAMIC SURFACE

To clean the work-top, you must follow the same precautions you use

to clean the glasses of your house. Soft stains caused by aluminium

pans bottoms can be removed by means of vinegar.

Make sure that sugar does not fall on the work-top during cooking, if

it falls disconnect the relevant hotplate, and clean as soon as possible

with hot water, before it gets cold.

In case there are stains of burnt sugar or similars after cooking, clean

them using a spatule or a razor before the cooking zone becomes

cold (see picture 10A).

Fig. 10A

CARE AND MAINTENANCE

OVEN DOOR

For some models, the oven door can be disassembled in the following

way:

hinges A are provided, for this purpose, with two movable jumpers B;

these, once hooked to the hinges slots C, when the door is completely

opened, block them (fig 10C).

(Only where present, remove the inside door glass of the oven, see

fig. 10B).

After that lift the door outward carring out the two movements shown

in the picture 10D. To do that, operate on the door sides next to the

hinges. In order to re-assemble the door, introduce the hinges in their

relevant slots.

Before closing the door, do not forget to remove the movable jumpers

B. Attention, in proximity of the oven door hinges, there is hurt danger.

OVEN

Clean the enamelled parts with a damp sponge using soap and water.

Grease can be easily removed using hot water or a specific cleansing

agent for enamelled surfaces. Do not use abrasive cleansers.

Fig. 10C Fig. 10B

The gas button close the fire trough operation.
All the other 3 working well

Thanks Charlie +972 528898704 Submitted on 22-3-2022 at 16:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fratelli Onofri YP 192.C50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fratelli Onofri YP 192.C50 Manual

Product: