456445
5
Zoom out
Zoom in
Previous page
1/11
Next page
Cod. 710.056.02.00 – Rev. 04 – 07.06.2001
ENGLISH
page 16 of 63
3. START UP
3.1 CONTROL PANEL
The machines belonging to this series are provided with an electronic system for parameters modification, so eventual
reset operations can be performed by means of the digital panel located on the front of the dryer.
The control panel illustrated in fig.1 is composed of 5 keys (ON/OFF, TEST, SET, DOWN e UP) and a 3 digit display,
with three signalling LEDs indicated as DP1, DP2, DP3.
The Control Panel illustrated below allows to control the machine operation.
Fig. 1
SIGNALLING LEDS
LED STATUS Description
DP1 ON -
DP2 ON
Condensate drain energized
DP3 ON
Compressor energized
3.2 FUNCTIONS OF THE KEYS
TEST: Holding it down for 3 seconds during normal operation, it allows to activate a condensate drainage
cycle.
SET: When pressed during normal operation, it displays the set-point value.
Holding it down for 10 seconds, it allows to access the parameters programming menu (see relevant table).
When pressed after having programmed new configuration or set point values, it stores the changes.
DOWN: When pressed while setting the set point or configuration parameters, it decreases the displayed
value of one unit per second, during the first 10 seconds, than of one unit every 0,1 sec.
Holding it down for 10 seconds during normal operation, it starts an automatic test cycle of the controller.
UP: When pressed while setting the set point or configuration parameters, it increases the displayed value
of one unit per second, during the first 10 seconds, than of one unit every 0,1 sec.
UP / DOWN (at the same time): Holding down at the same time these keys for 10 seconds, they lock or
unlock the access to the parameters programming menu. The controller visualises the message “PON”
(push-button ON) or “POF” (push button OFF) on the display. The possibility to lock the keypad prevents
that unauthorised could change configuration parameters.
ON / OFF: Keys to activate or deactivate the process. When the process is deactivated, the display shows
OFF.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Finicompressors Artic 134-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Finicompressors Artic 134-12 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Finicompressors Artic 134-12

Finicompressors Artic 134-12 User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info