778502
41
Zoom out
Zoom in
Previous page
1/276
Next page
9.11 Changing the saw blade
CAUTION
Risk of injury from hot and sharp insertion
tool
Do not use any blunt or faulty insertion
tools.
Wear protective gloves when handling an
insertion tool.
The sawing power and cutting quality are
heavily dependent on the condition and
tooth shape of the saw blade. This means
that only sharp saw blades that are suita
ble for the material to be machined should
be used.
Removing the saw blade
Open the saw blade cover (see section
9.10).
Remove the table insert (see section 9.6)
Set the maximum cutting height (see sec
tion 9.3).
Use the two spanners [12-1] to loosen the
saw blade [12-2] from the tool spin
dle [12-3].
Remove the spindle nut [12-5] and spindle
flange [12-4] from the tool spindle [12-3].
Remove the saw blade [12-2] from the tool
spindle [12-3].
A new or different saw blade can be fitted.
WARNING
Risk of accidents due to loose rotating saw
blade
The direction of rotation of the saw blade
and saw must match (see the direction of
the arrow).
The writing on the saw blade must be visi
ble.
Tighten the spindle flange [12-4] and spin
dle nut [12-5] to a tightening torque of
≥ 25 Nm.
Fitting the saw blade
Place a new or different saw blade [12-6]
on the tool spindle [12-3].
Attach the spindle flange [12-4] to the tool
spindle [12-3] and tighten the spindle
nut [12-5] with the two spanners [12-1].
The saw blade and cartridge must not
touch.
Fit the table insert (see section 9.6).
Close the saw blade cover (see section
9.10).
9.12 Changing the cartridge
Removing the cartridge
Open the saw blade cover (see section 9.10).
Set the inclination angle to 0° (see sec
tion 9.4).
Turn the cartridge locking device [13-1]
clockwise by one quarter of a rotation.
Remove the cartridge locking de
vice [13-1].
Remove the cartridge [13-3] from the
fastening pins [13-2].
WARNING
SawStop AIM technology is not triggered
Never use a cartridge that has been dam
aged or dropped.
Fitting the cartridge
Remove the protective cap [13-4] from
the new cartridge.
Place the cartridge [13-6] on the fasten
ing pins [13-5].
Insert the cartridge lock [13-7].
Turn the cartridge lock [13-7] anticlock
wise by one quarter of a rotation.
The saw blade and cartridge must not
touch.
Close the saw blade cover (see section
9.10).
10 Working with the electric
power tool
10.1 Safe working
When working on the machine, observe all of
the safety warnings that are listed at the start
and the following rules:
Safety devices
Only use the power tool if all safety devices
are in their correct positions and the power
tool is in good condition and has been well
maintained.
Always use the supplied spacer wedges
and the guard. Ensure that they are set
correctly as described in the operating
manual. If a spacer wedge is set incorrectly
and components that are required for safe
ty reasons (such as the guard) are re
moved, this may result in serious injuries.
English
41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TKS 80 EBS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TKS 80 EBS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info