778502

Festool TKS 80 EBS Manual

43
Zoom out
Zoom in
Previous page
1/276
Next page
For non-through cutting, use a feather
board* to ensure that the workpiece is
pressed tightly against the table during the
cutting process.
* Not included in the scope of delivery.
For non-through cutting, use the spacer wedge
for grooving (see section 9.8).
Grooving
► Adjusting the grooving width (see section
9.3).
► Set the preset profile setting rail as a rip
fence (see section 9.5).
► Guide the workpiece along the stop.
► Repeat the process until the required
grooving depth is achieved.
Rebating
Saw the first cut into the thin side of the
workpiece.
► Set the cutting height for the first cut (see
section 9.3).
► Set the preset profile setting rail as a rip
fence (see section 9.5).
The first cut can be made into the thin side of
the workpiece.
► Turn the workpiece.
► Set the cutting height for the second cut
(see section 9.3).
► Set the preset profile setting rail as a rip
fence (see section 9.5).
Select the clearance to the rip fence in
such a way that the groove that has al
ready been sawed is not on the side of
the stop.
The second cut on the thin side of the work
piece can be produced.
11 Storage
► Pull the mains plug out of the socket.
► Remove the extractor hose.
► Store the accessories included in the scope
of delivery the accessory holders or the
brackets provided for that purpose (see
section 7).
► Remove accessories not included in the
scope of delivery.
► Do not store the TKS 80 EBS outside.
CAUTION
Cuts due to protruding parts
► Store the bench-mounted circular saw in
an upright position.
12 Service and maintenance
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
► All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
WARNING
Incorrect testing may damage the machine
and injure users
► Special information is required for testing
the electrical safety. This is available from
your country's Festool service workshop.
Customer service and repairs must
only be carried out by the manufac
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
parts. Order no. at:
www.festool.co.uk/service
EKAT
1
235
4
► Damaged safety devices and components
must be repaired or replaced in a recog
nised specialist workshop, unless otherwise
indicated in the operating instructions.
► To ensure constant air circulation, always
keep the cooling air openings in the housing
clean and free of blockages.
► Use an extractor to remove dust deposits.
► If the extraction channel becomes clogged
with wood splinters:
▷ Open the saw blade cover (see section
9.10).
▷ Extract the blockage by means of suc
tion on the saw blade cover.
► Wind up the power cable again once the
work is complete (Fig. 3b).
The tool is equipped with special self-discon
necting carbon brushes. If they wear out, the
English
43
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TKS 80 EBS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TKS 80 EBS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info