Manual Festool TKS 80 EBS (page 37 of 276) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

778502

Zoom out

Zoom in

1/276

Please let us know your name and a contact op

portunity (email address, phone number, ad

dress), so that we can get in touch with you by

phone or in writing.

For information on data protection at Festool

please check our website: www.festool.co.uk

Changing the cartridge and saw blade

When the SawStop AIM technology is triggered,

the cartridge drives an aluminium block into

the saw blade and the saw blade comes to a

stop under the table.

WARNING

Risk of injury from ejected parts

► The cartridge and the saw blade must be

replaced.

Never use warped saw blades or saw

blades with cracked or broken teeth.

► Remove the table insert (see section 9.6).

► Remove the spacer wedge (see section 9.8).

► Turn the cutting height setting [4-2] to the

minimum of 0 mm and turn it further

against the resistance.

Turn the cutting height setting [4-2] to the

maximum of 80 mm.

The cutting height is set to the maximum of

80 mm.

► Turn the cartridge locking device [4-4]

clockwise by one quarter of a rotation and

pull it out [4-5].

► Undo the spindle nut [4-6] and remove the

flange [4-7] of the saw blade.

► Use the spanner [4-8] as a lever to carefully

push the saw blade out of the tool spin

dle [4-10].

Use the spanner [4-9] as a lever to carefully

push the cartridge out of the fastening

pins [4-11].

Repeat both steps until the saw blade and

the cartridge have been successfully re

moved.

► Fit a new cartridge (see section 9.12).

► Fit a new saw blade (see section 9.11).

► Fit the table insert (see section 9.6).

► Fit the spacer wedge (see section 9.8).

9 Additional settings/functions

WARNING

Risk of injury, electric shock

► Before all work on the power tool always

switch off the power tool, remove the

mains plug from the socket and then wait

until the saw blade has come to a stand

still.

9.1 Electronics

The TKS 80 EBS is monitored electronically

with the following properties:

Smooth start-up

The electronically controlled smooth start-up

function ensures that the power tool starts up

smoothly. The limited starting current ensures

that even standard household fuses are not

triggered.

Speed control

You can regulate the speed within the continu

ously variable speed range using the adjusting

wheel [2-7] (see section 4). This enables you to

optimise the cutting speed to suit the respective

material.

Speed range per material

Wood 6

Laminate, mineral materials 2–5

Aluminium, plastic 3–6

The preselected motor speed is kept constant

through electronic control. This ensures a uni

form cutting speed even when under load.

Overload safety device

The power supply is restricted if the power tool

is overloaded to extremes. The power supply is

disconnected completely if the motor jams for

some time. You will need to remove the load

and/or switch off the power tool before you can

use it again.

Temperature cut-out

To avoid the motor overheating, the power con

sumption is limited at an excessive motor tem

perature (e.g. if the pressure is too high while

working). If the temperature continues to rise,

the power tool switches off. It can only be

switched on again once the motor has cooled

sufficiently.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool TKS 80 EBS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool TKS 80 EBS Manual

Product: