778502
35
Zoom out
Zoom in
Previous page
1/276
Next page
8.1 Function monitoring
The SawStop AIM technology continuously
monitors the regular operation of the saw.
The LED lights show the current operating
status.
LED status in standby
The green
LED [2-4] lights
up constantly.
The bench-mounted
circular saw starts up
in approx. 10 sec
onds.
The red
LED [2-5] flash
es slowly.
The green
LED [2-4] lights
up constantly.
The bench-mounted
circular saw is ready
to use and is in stand
by mode.
The red
LED [2-5] is not
lit.
The green
LED [2-4] flash
es rapidly.
Restart protection
When activating by
pass mode, the yel
low SawStop AIM
switch was released
too early.
To rectify the
fault, press the red
STOP button.
(alternating)
The red
LED [2-5] flash
es rapidly.
The green
LED [2-4] lights
up constantly.
Contact with the saw
blade in standby.
Remove the
contact trigger and
wait approx. 5 sec
onds until the fault is
rectified.
Or:
Distance between
saw blade and fence
too small.
When sawing
cutting widths of
≤ 3 mm, use a sup
port ≥ 19 mm.
The red
LED [2-5] flash
es rapidly.
The green
LED [2-4] is not
lit.
Cartridge locking de
vice fault.
Switch off the
bench-mounted cir
cular saw and check
the cartridge locking
device.
The red
LED [2-5] flash
es slowly.
The green
LED [2-4] flash
es slowly.
Saw blade missing or
too small.
Switch off the
bench-mounted cir
cular saw and insert a
suitable saw blade
(see section 3).
The red
LED [2-5] lights
up constantly.
The green
LED [2-4] is not
lit.
Replace the car
tridge.
Switch off the
bench-mounted cir
cular saw. If the fault
is still not rectified,
insert a new car
tridge.
Or:
Electronics too cold:
Warming phase at
ambient tempera
tures < 5 °C.
Try starting
again after a few mi
nutes.
The red
LED [2-5] lights
up constantly.
LED status during operation
The green
LED [2-4] flash
es rapidly.
The saw blade comes
to a stop.
The SawStop AIM
technology is active
and is triggered upon
contact.
The red
LED [2-5] is not
lit.
The green
LED [2-4] flash
es slowly.
Activated bypass
mode.
The red
LED [2-5] is not
lit.
English
35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TKS 80 EBS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TKS 80 EBS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info