778502

Festool TKS 80 EBS Manual

33
Zoom out
Zoom in
Previous page
1/276
Next page
WARNING
Power tool tips over on uneven ground
Risk of accidents
► Ensure that the power tool is securely
positioned.
The floor must be level, with a max. gradi
ent of 10°, and free of loose objects (e.g.
chips and offcuts).
Foldaway legs
CAUTION
Crushing injuries to hands or fingers when
folding the foldaway legs in or out
► Wear protective gloves.
► Open the rotary knobs for the foldaway
legs [1-12] as far as they will go.
► Fold the foldaway legs [1-17] out or in.
► Screw in the rotary knobs for the foldaway
legs [1-12] tight.
If the TKS 80 EBS wobbles, the length of a leg
can be adjusted by turning the end cap [1-18]
until the machine stands securely.
Removable legs
WARNING
Risk of accidents due to tilting power tool
► Always use the removable legs* together
with an extension table* or a sliding table*.
* Not included in the scope of delivery.
6.2 Prior to commissioning
► Remove all packaging material, including
packaging material underneath the table.
► Pull out the shipping protection [1-21].
► Remove the safety sticker [1-8].
► Remove the pre-installed spacer wedge for
grooving [1-4] (see section 9.8) and store it
in the accessory holder [1-1].
► If necessary, replace the pre-installed uni
versal saw blade with a saw blade for the
material to be sawed (see section 9.11).
► Fit the spacer wedge with guard (see sec
tion 9.8).
► Fit the preset profile setting rail (see sec
tion 9.5).
6.3 Switching on/off
WARNING
SawStop AIM technology only works with
protective conductor terminal and with con
nected, earthed power source
Risk of injury
► Make sure that power is not supplied via
the SYS-PST 1500 or a transformer, for ex
ample.
NOTICE
SawStop AIM technology is triggered
► Only switch on the TKS 80 EBS if the saw
blade is not in contact with the workpiece,
accessories or other objects.
► Only use accessories intended for
the TKS 80 EBS.
Warming phase
Electronics too cold: Ambient tempera
tures of < 5 °C may delay the start of the
TKS 80 EBS .
Try starting again after a few mi
nutes.
Switching on
► To switch on the machine, press the green
main switch [2-1].
The green LED [2-4] lights up constantly.
The red LED [2-5] flashes slowly.
The TKS 80 EBS is carrying out a self-check.
► Wait until the status of the LEDs changes.
The green LED [2-4] lights up constantly.
The red LED [2-5] is not lit.
The TKS 80 EBS is in standby mode.
► Press the green START button [2-3]
The TKS 80 EBS is operational. SawStop AIM
technology is activated.
WARNING
SawStop AIM technology is not triggered
► Only touch the saw blade when the ma
chine has come to a complete standstill if
there is a power failure or drop in voltage
after switching it on.
Switching off
► To switch off sawing mode, press the red
STOP button [2-2].
The green LED [2-4] flashes rapidly.
The red LED [2-5] is not lit.
English
33
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TKS 80 EBS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TKS 80 EBS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info