778502
31
Zoom out
Zoom in
Previous page
1/276
Next page
Service and maintenance
Repairs and sanding work may only be car
ried out by Festool customer service work
shops or experts.
The tool design must not be changed.
Deresinify and clean the tool regularly
(cleaning agent with pH between 4.5 and 8).
Blunt edges can be resharpened on the
clamping surface to a minimum cutting
edge thickness of 1 mm.
Only transport the tool in suitable packag
ing – risk of injury!
2.5 Aluminium processing
When sawing aluminium, the following
measures must be taken for safety reasons:
Install an upstream residual-current circuit
breaker (RCD, PRCD).
Connect the power tool to a suitable dust
extractor.
Regularly clean dust deposits from the mo
tor housing on the power tool.
Use an aluminium saw blade.
Wear protective goggles.
2.6 Other risks
In spite of compliance with all relevant design
regulations, dangers may still present them
selves when the machine is operated, e.g.:
Touching rotating parts from the side: Saw
blade, clamping flange, flange screw,
Touching live parts when the housing is
open and the mains plug is still plugged in,
Workpiece parts being thrown off,
Parts of damaged tools being thrown off,
Noise emissions,
Dust emissions.
2.7 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level LPA = 87 dB(A)
Sound power level LWA = 102 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
The specified noise emission values
have been measured in accordance with a
standardised test procedure, can be used
to compare one power tool with another,
and can also be used for a provisional as
sessment of the load.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3 Intended use
The TKS 80 EBS is designed as a transportable
power tool for sawing wood, laminated wooden
panels, non-ferrous metals and plastic.
NOTICE
SawStop AIM technology is triggered
When sawing non-ferrous metals, wet,
statically charged or conductive materials,
deactivate the SawStop AIM technology (by
pass mode).
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in
tended use.
3.1 Saw blades
Only use Festool saw blades that are designed
for use in this power tool.
Saw blade dimensions: 254 x 30 x 2.4 mm
Cutting width > 2.2 mm (corresponds to the
kerf width)
Locating bore, dia. 30 mm
Standard blade thickness < 1.8 mm
Saw blade with chip angle of ≥ 15°
Suitable for speeds of 3500 rpm or above
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
Saw blades made of high-alloy high-speed steel
(HSS steel) and grooving saw blades must not
be used.
3.2 Cartridges
Only use Festool cartridges that are designed
for use in this power tool.
English
31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TKS 80 EBS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TKS 80 EBS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info