796183
23
Zoom out
Zoom in
Previous page
1/129
Next page
Brush replacement
The brush [4-2] must be replaced when it be
comes worn.
Unscrew the screws with the washers [4-1]
first, then remove the brush from the cov
er [4-4] with the springs [4-3].
Insert the springs in the openings of the
new brush and turn them clockwise to se
cure them (see figure [4A]). Deflected
springs that are not vertical do not consti
tute a failure.
Then take the brush with the inserted
springs, hook it into the cover [4-4] from
the front and tilt it (see figure [4B]).
Ensure that the springs engage in the guide
openings in the cover and screw in the
screws with the washers [4-1] again.
6.6 Depth stop
The sanding depth setting depends on the ma
terial being processed.
Position the adapter [5-2].
Turn the adapter to adjust the sanding
depth (anti-clockwise = greater sanding
depth, clockwise = smaller sanding depth).
CAUTION! Tighten the nut [5-1].
6.7 Dust extraction
CAUTION
Hazardous dust
Damage to the respiratory passage
Always working with a dust extraction sys
tem connected.
Only use Festool mobile dust extractors
with dust class L, Festool suction hoses
and the Festool pre-separator.
Only use antistatic mobile dust extractors
to prevent static discharge.
A mobile dust extractor with a suction hose di
ameter of 36 mm can be connected at the ex
tractor connector [1-10].
6.8 Connecting a power tool via Bluetooth®
Connecting to the mobile dust extractor
Activate the mobile dust extractor's auto
matic mode (see the operating manual for
the mobile dust extractor).
Press the connection button on the mobile
dust extractor or on the remote control
once (see the operating manual for the mo
bile dust extractor/retrofit receiver mod
ule).
Switch on the power tool.
The mobile dust extractor starts up and the
power tool is connected until the mobile dust
extractor or the power tool is manually switch
ed off.
LED indicator [1-4]
LED indicator Meaning
LED flashes
blue once. After being switched on, the
power tool searches for a mobile
dust extractor ready for connec
tion.
LED lights up
blue. The power tool is connected to a
mobile dust extractor via
Bluetooth®.
LED flashes
red. The power tool has overheated.
Continue working without a load
on the power tool.
LED lights up
red. Electronics failure. Contact an
authorised service workshop.
7 Working with the electric
power tool
WARNING
Risk of injury
Only guide the power tool into the material
when it is switched on (running).
Always secure the workpiece in such a
manner that it cannot move.
Keep your hands away from the rotating
sanding tools.
8 Service and maintenance
WARNING
Risk of injury, electric shock
Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
Customer service and repairs must
only be carried out by the manufac
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
English
23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool RG 130 ECI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool RG 130 ECI in the language / languages: All languages as an attachment in your email.

The manual is 2.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info