796183
24
Zoom out
Zoom in
Previous page
1/129
Next page
Always use original Festool spare
parts. Order no. at:
www.festool.co.uk/service
EKAT
1
235
4
To ensure constant air circulation, always
keep the cooling air openings in the housing
clean and free of blockages.
Clean the sanding tools after use.
8.1 Cleaning the dust screen
To prevent the power tool from overheating, the
dust screen [6-1] must be cleaned regularly on
both sides (see figure [6]).
Remove the dust screen. Use a screw
driver as a levering tool if necessary.
Extract the dust from the dust screen.
Insert the dust screen.
9 Storage
The packaged power tool can be stored in a dry
place without heating as long as the inside tem
perature does not fall below -5 °C.
The unpackaged power tool must only be stored
in a dry, enclosed space where the temperature
does not fall below +5 °C and where no extreme
temperature fluctuations can occur.
Store the insertion tools separately from the
power tool.
10 Accessories
Always use original Festool tools and accesso
ries. Using low-quality tools or accessories
from other manufacturers may increase the
risk of injury and seriously unbalance the ma
chine, decreasing the quality of the working re
sults and accelerating power tool wear.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.
11 Environment
Do not dispose of the device in the
household waste! Recycle devices, ac
cessories and packaging. Observe appli
cable national regulations.
In accordance with the European Directive on
waste electrical and electronic equipment and
implementation in national law, used power
tools must be collected separately and handed
in for environmentally friendly recycling.
Information on collection points for proper dis
posal can be found at www.festool.co.uk/
recycling.
Information on REACH: www.festool.co.uk/
reach
12 General information
12.1 Information on data privacy
The power tool contains a chip which automati
cally stores machine and operating data. The
data saved cannot be traced back directly to an
individual.
The data can be read in a contactless manner
using special devices and shall only be used by
Festool for fault diagnosis, repair and warranty
processing and for quality improvement or en
hancement of the power tool. The data shall not
be used in any other way without the express
consent of the customer.
12.2 Information about Bluetooth®
As soon as the tool is connected to the mobile
device via Bluetooth® and the secure connec
tion has been authorised, the tool will connect
automatically to the mobile device from this
point onwards.
The Bluetooth® word mark and the logos are
registered trademarks of Bluetooth SIG, Inc.;
they are used by TTS Tooltechnic Systems AG &
Co. KG, and therefore by Festool, under licence.
Imported into the UK by
Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain
English
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool RG 130 ECI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool RG 130 ECI in the language / languages: All languages as an attachment in your email.

The manual is 2.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info