796183
21
Zoom out
Zoom in
Previous page
1/129
Next page
Surface-restoration
grinders
RG 130 ECI
Dust extraction connec
tion 36 mm
Frequency 2402 MHz-2480 MHz
Equivalent Isotropically
Radiated Power (EIRP) < 10 dBm
Weight as per EPTA
procedure 01:2014 3.9 kg
5 Parts of the device
[1-1] Handle
[1-2] Speed control
[1-3] Bluetooth® button
[1-4] LED indicator
[1-5] Handle screw
[1-6] Auxiliary handle
[1-7] Spindle lock
[1-8] Tilting brush segment
[1-9] Brush
[1-10] Extraction attachment
[1-11] Locking button
[1-12] On/off switch
[1-13] Dust screen
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Commissioning
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing any work on the
machine.
WARNING
Unauthorised voltage or frequency.
Risk of accidents
The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
In North America, only Festool machines
with the voltage specifications 120 V / 60 Hz
may be used.
CAUTION
Breaking and flying insertion tools
Risk of injury
Do not use any damaged insertion tools.
After switching on the power tool and be
fore each use, check the insertion tools for
vibration.
CAUTION
Materials which produce a lot of dust
Damage to the power tool due to the ingress
of dust, risk of injury
Do not work overhead.
Always work with a dust screen.
6.1 Switch on/off
The switch [1-12] is an on/off switch (press =
ON, release = OFF).
The on/off switch [1-12] with the locking but
ton [1-11] can be engaged to operate in contin
uous mode. Press the on/off switch [1-12]
again to release the lock.
6.2 Electronics
Smooth start-up
The electronically controlled smooth start-up
function ensures that the power tool starts up
smoothly. The limited starting current ensures
that even standard household fuses are not
triggered.
Speed control
You can use the speed control [1-2] to continu
ously adjust the speed within the speed range
(see section 4).
The required speed depends on the sanding
disc and the material.
Overload safety device
The power supply is restricted if the power tool
is overloaded to extremes. The power supply is
disconnected completely if the motor jams for
some time. You will need to remove the load
and/or switch off the power tool before you can
use it again.
Restart protection
The built-in restart protection prevents the
power tool from starting up again automatically
if the power is disconnected during continuous
use. To put the power tool back into operation,
it must first be switched off and then on again.
English
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool RG 130 ECI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool RG 130 ECI in the language / languages: All languages as an attachment in your email.

The manual is 2.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info