796183
20
Zoom out
Zoom in
Previous page
1/129
Next page
ful environmental conditions during stor
age.
Handle and transport sanding tools with
care.
Pay attention to the information on the la
bel or the sanding tool itself, as well as us
age restrictions, safety warnings or other
instructions. If any points are unclear when
choosing sanding tools, the user must con
tact the manufacturer for information be
fore using the tool.
Sanding discs must be fitted in accordance
with section 6.4.
Only experienced staff are permitted to fit
sanding tools.
2.5 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level LPA = 96 dB(A)
Sound power level LWA = 85 dB(A)
Uncertainty K = 3.0 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
ah = 4.0 m/s2
K = 1.5 m/s2
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
Grinding thin sheets of metal or other easi
ly vibrating structures with a large surface
can result in a total noise emission much
higher than the declared noise emission
values. Such workpieces should as far as
possible be prevented from emitting sound
by suitable measures such as the applica
tion of heavy flexible damping mats.
3 Intended use
The power tool is intended for surface sanding
on concrete surfaces, sanding off formwork
transitions and removing plaster, paint, adhe
sive residue, coatings or rust and for cleaning
concrete and wooden surfaces.
The power tool is designed for use with special
sanding discs according to EN 13236 recom
mended by the manufacturer (see section 6.4)
and must not be used with composite sanding
discs.
The power tool must only be used for dry sand
ing of large surfaces with a powerful mobile
dust extractor.
The user is liable for improper or non-in
tended use.
4 Technical data
Surface-restoration
grinders
RG 130 ECI
Power
EU
CH
GB
AUS
220–240 V~
230 V~
110 V~/230 V~
220–240 V~
Frequency 50–60 Hz
Power consumption 1600 W
Speed (no-load) 2200–6500 rpm
Sanding disc diameter 130 mm
English
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool RG 130 ECI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool RG 130 ECI in the language / languages: All languages as an attachment in your email.

The manual is 2.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info