796189
24
Zoom out
Zoom in
Previous page
1/152
Next page
Possible causes Solution
Filter bag full. Insert a new filter bag
(see section 11.5).
Dirty main filter. Clean the main filter
(see section 11.4).
Change the main filter
(see section 11.6).
Suction hose is
blocked or kinked. Eliminate the block or
straighten the hose.
Value set on the
suction power ad
justment [1-14] is
too low.
Set the suction power
to a higher value (see
section 10.1).
Battery charge level
low. – Charge the battery
packs.
– Use new battery
packs.
Electronic monitor
ing malfunction. Have the fault rectified
by a Festool service
workshop.
Working with sand
ers. Activate the bypass
function (see sec
tion 10.2).
10.4 Temperature cut-out
To protect against overheating, the tempera
ture cut-out switches off the cordless mobile
dust extractor before it reaches the critical
temperature. The status display LED [1-15] in
dicates a fault.
LED lights up red Excessive temperature
Switch off the cordless mobile dust extrac
tor, let it cool down.
Switch the cordless mobile dust extractor
on again after approx. ten minutes.
10.5 SysDoc
WARNING
Risk of injury
Do not stand on the storage area of the
cordless mobile dust extractor.
CAUTION
Risk of injury
When transporting, ensure that the T-Loc
is closed.
A Systainer can be fastened to the storage area
of the hose holder [1-3] with the T-Loc
lock [1-4].
10.6 Applying the brake
Raise the front of the cordless mobile dust
extractor slightly.
Push down the brake [1-10] until it engages
into position.
Actuate the release button [1-11] to release
it.
11 Working
11.1 Extracting dry materials
CAUTION
Hazardous dust
Damage to the respiratory passage
Always use a filter bag!
Check that the main filter is undamaged
before extracting.
When extracting dust that exceeds the
limit value, only extract from one dust
source (power or compressed-air tool).
Observe the following when extracting dust
generated by operating power tools:
Ensure there is adequate ventilation! Observe
regional regulations!
Limit values: Exhaust air max. 50% of the fresh
air volume
Equation: Room volume VR x air renewal rate
LW
11.2 Extracting wet materials/liquids
Remove the filter bag!
Use a special wet filter.
The dust extraction stops automatically when
the maximum fill level is reached.
The bottom LED [1-15] lights up red.
Switch off the mobile dust extractor [1-12].
Open the locking clips [1-7] and remove the
top section of the machine.
Empty the dirt trap [1-9].
After wet extraction, allow the main filter to dry!
Dry the mobile dust extractor before extracting
dry dust.
English
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTLC MINI I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTLC MINI I in the language / languages: All languages as an attachment in your email.

The manual is 17.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info