796189
26
Zoom out
Zoom in
Previous page
1/152
Next page
Flashes blue once
Confirmation of the connection button
[1-19] or MAN button [1-21] having been
pressed.
Flashes purple once
The remote control has been reset.
Flashes red
The remote control's battery is nearly
empty and must be replaced.
12.4 Changing the remote control's
battery [8]
The remote control is operated using a CR
2032 battery.
If the battery compartment is opened, we
recommend that you replace the seal (20 x
1.3 mm).
Open the battery compartment closure.
Replace the battery.
Close the battery compartment.
12.5 Software update
To check whether a software update that will
enhance the functions of the remote control or
improve existing functions is available, a
Bluetooth® connection to the Festool Work App
can be established.
Press the connection button on the remote
control [1-19] until the LED indicator [1-20]
flashes blue.
The remote control is ready for connection for
60 seconds.
Follow the instructions provided in the
Festool Work App to authorise the secure
connection.
13 Warning signals
Warning
signal Description of warning signal Cause Action
Visual LED [1-15] Flashes green Battery pack empty. Charge the battery pack.
Incorrect battery
pack. Use correct battery pack (see
section 4).
Battery pack too cold. See battery pack operating man
ual for operating temperature.
Flashes red Battery pack faulty. – Change the battery pack.
– Use the charger to check that
the battery pack is fully function
al once it has cooled down.
Lights up red Cordless mobile dust
extractor overheating See section 10.4.
Battery pack over
heating. Leave the battery pack to cool
for approx. ten minutes.
Water level limit:
Maximum fill level
reached
See section 11.2.
Acoustic Signal Regular Volume flow below
20 m/s. Only for dust class M (see sec
tion 10.3).
Increasing, begin
ning with two short Battery pack charge
low. – Charge the battery pack.
– Use a newly charged battery
pack.
English
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTLC MINI I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTLC MINI I in the language / languages: All languages as an attachment in your email.

The manual is 17.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info