796189
23
Zoom out
Zoom in
Previous page
1/152
Next page
Connecting a new power tool overwrites
the previous connection.
This function is only possible on Festool
power tools with a Bluetooth® battery
pack.
9.2 Connecting the CT-F I remote control
To be able to connect a remote control to a
cordless mobile dust extractor, the remote con
trol must be reset (see "Reset on the remote
control").
Remote controls that have not been connected
previously can be connected directly.
A connection that has been created be
tween remote controls and the cordless
mobile dust extractor will persist even af
ter pressing the on/off button or removing
a battery pack (from the cordless mobile
dust extractor).
The cordless mobile dust extractor can be
connected to as many as five remote con
trols at the same time. The cordless mo
bile dust extractor can only be connected
to one battery-powered power tool at a
time.
If a cordless mobile dust extractor which
was initially switched on using the battery
pack is switched off using the remote con
trol, the temporary connection between
the connected battery pack and the cord
less mobile dust extractor will be lost. The
battery pack can then be connected again.
Hold down the connection button [1-16] on
the cordless mobile dust extractor for three
seconds in standby mode.
The connection display [1-17] rapidly flashes
blue. For a period of 60 seconds, the cordless
mobile dust extractor is ready for connection.
Press the MAN button [1-21] on the remote
control.
The remote control is permanently stored in the
cordless mobile dust extractor.
Resetting on the remote control
Resetting deletes the connection between a re
mote control and the cordless mobile dust ex
tractor.
Press and hold the connection button [1-19]
and the MAN button [1-21] for 10 seconds.
The LED indicator [1-20] lights up purple, if the
reset has taken place.
9.3 Connecting a mobile device
The cordless mobile dust extractor can be con
nected to a mobile device (e.g. for a software
update) using the Festool Work app.
Hold down the connection button [1-16] on
the cordless mobile dust extractor for three
seconds in standby mode.
The connection display [1-17] rapidly flashes
blue. For a period of 60 seconds, the cordless
mobile dust extractor is ready for connection.
Follow the instructions provided in the
Festool Work app to authorise the secure
connection.
10 Settings
10.1 Adjusting the suction power
Press the plus or minus button for the suc
tion power adjustment [1-14] while extract
ing.
The green LEDs on the status display [1-15] in
dicate the current performance level.
10.2 Connecting sleeve
The bypass function of the connecting
sleeve [3-1] prevents strong suction from
sanding machines and floor nozzles on smooth
surfaces.
Open
Turn the adjusting ring to the "OPEN" posi
tion.
Close
Turn the adjusting ring to the "CLOSE" posi
tion.
10.3 Volumetric flow monitoring (only for
dust class M)
CAUTION
Hazardous dust
Damage to the respiratory passage
Correct functioning of volumetric flow
monitoring is only ensured with the suction
hose D 27/32x3.5m-AS/CTR.
For safety reasons, an acoustic warning signal
sounds if the air speed in the suction hose falls
below 20 m/s.
English
23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTLC MINI I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTLC MINI I in the language / languages: All languages as an attachment in your email.

The manual is 17.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info