724612
18
Zoom out
Zoom in
Previous page
1/42
Next page
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
1300 889 028
(toll free)
e-mail: info.aldi@positecgroup.com
MODEL: №. 10084 • 08/2019 • FCS4800A
16
Filling up with Fuel and Oil
IMPORTANT: This is a 4 stroke engine and does not require mixing any oil
with the fuel. The oil for the engine and also the chain / bar oil is from the one
oil tank located at the front of the chainsaw - the combination oil tank (6).
EVERY time fuel is added to the chainsaw fuel tank (8), the combination oil
tank (6) should be lled with 4 stroke engine oil.
WARNING: Fuel is very ammable. Avoid smoking or causing any
sparks or ames near fuel. Make sure that you stop the engine and
allow it to cool before refuelling the machine. Select outdoor bare ground for
fuelling and move at least 15 metres away from the fuelling point before
starting the engine.
It is suggested to wear safety glasses when adding fuel or oil.
Only use oil that is expressly labelled for use with air-cooled 4-stroke
engines. We recommend good quality 4 stroke engine oil.
Use fresh unleaded fuel. Do not use ethanol based fuels.
Poor quality fuel or oil may damage sealing rings, fuel lines or the fuel tank.
Only use new 4 stroke engine oil in this chainsaw. We recommend SAE
15W/50 4 stroke oil.
DO NOT use waste or regenerated oil on the chainsaw or damage to the
engine will result.
CAUTION. To maximise the lifetime of the engine, avoid the following:
Do not use raw fuel, it will severely damage the engine very quickly.
ONLY use clean fresh unleaded fuel which has NOT been mixed with oil.
ONLY use 4 stroke engine oil in the front combination oil tank (6) which
supplies both the chain and also the engine with oil.
Do not run the combination oil tank (6) dry. Always ll the combination oil
tank (6) every time fuel is added to the fuel tank (8).
Do not run the tank dry at speed high, as this may cause damage to the engine.
Do not use oil meant for 2-stroke engines, it will cause spark plug fouling,
exhaust blocking and piston ring sticking.
Do not use fuel that has been left standing for one month or more, as it
can cause clogging of the carburettor.
Before storing the chainsaw for an extended period, empty the fuel tank
(8), clean it then run the engine at idle to empty the carburettor.
NOTE: Do not discard an unwanted fuel container with household waste.
It must be taken to an authorised repository site.
Preparation
Preparation
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FCS4800A in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info