724612
16
Zoom out
Zoom in
Previous page
1/42
Next page
47.1cc Petrol Chainsaw
AFTER SALES SUPPORT
1300 889 028
(toll free)
e-mail: info.aldi@positecgroup.com
MODEL: №. 10084 • 08/2019 • FCS4800A
14
7. Once the chain (20) is in position around the
nose of the guide bar (19), ensure that the chain
links are located within the bar guide channel,
(Fig G), and the chain (20) is fully located around
the drive sprocket (29).
8. On the chain drive side cover (23), adjust the
chain tensioning screw (37) in an anti clockwise
direction as per the following, so the assembly
of the guide bar (19) is NOT tight on the chain
(20). When replacing the existing chain, rotate
the adjustment screw 5 FULL turns in an anti-
clockwise direction.
When replacing with a new chain, rotate the
adjustment screw 10 FULL turns in an anti-
clockwise direction (Fig H).
9. After adjusting the chain tensioning screw
(37), replace the chain side cover (23) on to the
chainsaw and hold the cover rmly against the
bar. DO NOT t the nuts (Fig I). While holding
the cover on rmly, grasp the guide bar (19) and
slide it outward slowly (Fig J).
When the chain tensioning pin (30) aligns with
the clearance hole in the bar, the cover will drop
rmly and at on the bar (Fig L - shows internal
side on chain drive side cover and where the
chain tensioning pin is located).
If the chain tensioning pin (30) does not align,
adjust the chain tensioning screw (37) using the
combination tool (at blade screwdriver) (32) so
the pin aligns with the hole in the bar (Fig K).
Assembly
I.
J.
K.L.
H.
5 FULL
TURNS
ANTICLOCKWISE
G.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FCS4800A in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info