724612
19
Zoom out
Zoom in
Previous page
1/42
Next page
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
47.1cc Petrol Chainsaw
MODEL: №. 10084 • 08/2019 • FCS4800A
17
Preparation
Fuelling the Chainsaw
WARNING: Always ensure the engine is
turned o before undertaking this task.
Never add fuel to a machine with a running or hot
engine. Move at least 15m away from the on one line
site before starting engine.
Do not smoke when refuelling or operating the
chainsaw.
1. Rest the chainsaw on its side so the fuel tank (8)
is facing up, on the ground or a secure surface
and wipe any debris from around the fuel tank (8),
and the combination oil tank (6).
2. On this chainsaw, the combination oil tank cap
(7) is used to unscrew and open the fuel tank (8).
Remove the combination oil tank cap (7) by
rotating in an anti-clockwise direction (Fig P).
Wipe the underside of the combination oil tank
cap (7) to ensure it is clean and dry.
NOTE: Ensure you follow fuelling the chainsaw
with lling the combination oil tank (6) with good
quality 4 stroke oil per the instructions that follow
this section. The purpose of using the
combination oil tank cap (7) to open the fuel tank
cap (9) is to ensure you ll the fuel tank (8), and
then ll the combination oil tank (6). This should
be performed EVERY time the chainsaw is fueled.
3. Using the triangular shaped underside of the
combination oil tank cap (7), apply it onto the
fuel tank cap (9) and rotate in an anti-clockwise
direction to remove the fuel tank cap (9) (Fig Q).
4. With the aid of a funnel, pour fresh unleaded fuel
into the fuel tank (8) to approximately 80% of its
capacity (Fig R).
WARNING: Do not use ethanol based fuels.
Do not mix fuel and oil.
NOTE: Be careful not to spill any mixture. If this
happens, wipe the spill with a clean rag.
P.
S.
R.
Q.
LOOSEN
TIGHTEN
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FCS4800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FCS4800A in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info