734927
23
Zoom out
Zoom in
Previous page
1/34
Next page
Preparation
21
5. Firmly attach the disc guard to the holder.
To do this, move the lever of the fastening clamp towards the disc guard until it
touches the neck of the disc guard.
6. Ensure that the disc guard is firmly attached and cannot be turned when on the
holder.
Changing the disc guard
Follow the steps described below if you wish to replace the installed disc guard
7a
with the disc guard
7b
:
1. Switch the grinder off and remove the battery from the battery holder
5
.
2. Remove the clamping flange
9
, the grinding/cutting disc
14
and the support
flange
10
from the spindle
11
as described in section ‘Removing the installed
grinding/cutting disc’.
3. Completely open the fastening clamp
12
on the installed disc guard (see Fig.B).
Pull back the lever of the fastening clamp on the neck of the disc guard and
remove the fastening clamp from the hook on the disc guard.
4. Turn the disc guard clockwise or anti-clockwise on the holder on the grinder to
align the disc guard until the catches on the inside of the disc guard are positioned
above the corresponding notches on the holder.
5. Pull the disc guard downwards off the holder
13
on the grinder.
6. From below, put the new disc guard with an opened fastening clamp onto the
holder so that the catches on the inside of the disc guard are positioned above the
corresponding notches on the holder.
7. Push the disc guard as far as possible into its position on the holder.
8. Align the disc guard, and when the disc guard is in the desired position, again put
the fastening clamp over the hook of the disc guard.
9. Firmly attach the disc guard to the holder.
To do this, move the lever of the fastening clamp towards the disc guard until it
touches the neck of the disc guard.
10. Ensure that the disc guard is firmly attached and cannot be turned when on the
holder.
11. Reattach the clamping flange, the grinding/cutting disc and the support flangeto
the spindleas described in section ‘Fitting the grinding/cutting disc’.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info