734927
25
Zoom out
Zoom in
Previous page
1/34
Next page
Operation
23
Operation
WARNING!
Risk of injury!
Improper handling may pose a risk of injury.
WARNING! Lay down the grinder only once the spindle has
come to a complete stop.
WARNING! Carry out a test run before each use and after each
tool change. Always ensure that the grinding/cutting discs are
in perfect condition, properly installed and can freely rotate.
The test run should last at least one minute.
Using the grinder
Please note that the On/Off switch does not automatically lock when in
the front position:
If the On/Off switch won’t lock in the forward position as described
below, the On/Off switch will slide back when released and the grinder
will turn off.
Switching the grinder on
1. Hold on tightly to the grinder with both hands by firmly wrapping one hand
around the handle surface
4
and one hand around the
supplementary handle
6
(see Fig.A).
2. Hold down the rear part of the On/Off switch
3
and slide the On/Off switch forward
towards the disc guard
7a
or
7b
to turn on the grinder.
3. To keep the On/Off switch in this switch position, hold the On/Off switch pushed
forward and tilt the front part of the On/Off switch downwards so that it slips into
the slot provided on the grinder and the On/Off switch locks into place.
Carrying out work with the grinder
4. Use the grinder to carry out the intended work.
Please observe the information provided in the chapter ‘Operating instructions’
when carrying out work.
Switching the grinder off
5. Hold down the rear part of the On/Off switch so that the front part of the On/Off
switch exits the locked switch position.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info