734927
26
Zoom out
Zoom in
Previous page
1/34
Next page
Operation
24
Start-up protection
When the battery is inside the grinder and the On/Off switch
3
is in the front switch
position, start-up protection shall prevent the angle grinder from starting.
In this case, first switch off the On/Off switch, as described in the chapter ‘Using
the grinder’.
You can then continue to use the grinder as usual.
Operating instructions
WARNING!
Risk of damage to health!
Improper use may result in injury.
WARNING! Never process material containing asbestos.
NOTICE!
Risk of damage!
Improper use of the grinder may damage the grinder.
The grinder is not designed to be used with water. Do not
wet-cut with the grinder.
General operating instructions
Always use the correct disc and disc cover for the desired work (rough
machining/cutting) and materials to be machined (metal/stone material).
Ensure you have a stable work surface on which to machine the workpiece.
Check the direction of rotation and function.
Maintain the maximum distance between the device and operator.
Avoid banging the workpiece.
Special instructions for cutting
Apply light pressure only to the cutting disc.
Do not subject the cutting disc to any lateral forces.
Adjust the feed motion to the material.
Push the grinder in the opposite direction (see Fig.E) and at a 90° angle to the
workpiece.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex FAW 40-I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex FAW 40-I in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ferrex FAW 40-I

Ferrex FAW 40-I User Manual - German - 36 pages

Ferrex FAW 40-I User Manual - French, Italian - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info