779785
21
Zoom out
Zoom in
Previous page
1/44
Next page
21
area as well as all other generally recog-
nized rules of safety.
29. Note the information published by your
professional associations.
30. Operators must be at least 18 years of
age.
31. Never remove loose splinters, chips or
jammed pieces of wood when the saw
blade is running.
32. To rectify faults or remove jammed
pieces of wood, always switch o the
machine  rst. – Pull out the power plug
33. Persons working on the machine should
not be distracted.
34. Keep your workplace clean of wood
scrap and any unnecessary objects.
35. Before you use the machine for the  rst
time, check that the voltage marked
on the rating plate is the same as your
supply voltage.
36. Check the power cable. Never use a
faulty or damaged power cable.
37. Operate the saw only with a suitable
vacuum extraction system or a standard
industrial vacuum cleaner.
38. Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the tool or
who have not read these instructions
to use the tool. Electric tools are dange-
rous if they are used by inexperienced
people.
39. Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with
sharp cutting edges will jam less and
are easier to control.
40. Have your tool repaired only by trained
personnel using only genuine spare
parts. This will ensure that your tool
remains safe to use.
41. All covers and safety devices have to be
properly  tted before the equipment is
switched on.
42. When working with wood that has
been processed before, watch out for
foreign bodies such as nails or screws
etc.
43. Before you actuate the On/O switch,
make sure that the saw blade is cor-
rectly  tted and that the equipments
moving parts run smoothly.
44. Keep handles dry, clean and free from
oil and grease.
Keep this safety information in a safe
place!
F_TS_2000_1_GB_SPK7.indb 21F_TS_2000_1_GB_SPK7.indb 21 04.06.2019 10:19:0004.06.2019 10:19:00
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex F-TS 2000-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex F-TS 2000-1 in the language / languages: English as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info