779785
20
Zoom out
Zoom in
Previous page
1/44
Next page
20
10. Never dismantle the machine‘s safety
devices or render them inoperative.
11. Re t all guards and safety devices im-
mediately after you have completed any
repairs or maintenance work.
12. Keep the push stick or handle for a push
block at the machine at all times, even
when you are not using them. Slot the
push stick or the push block into its hol-
der when not in use.
13. The sawing of angles/wedges is only
permitted if an appropriate auxiliary
stop (cross stop) is used.
14. Replace the table insert if it is worn –
pull out the power plug –
15. If necessary, wear suitable personal
protection equipment. This could con-
sist of:
a. Ear mu s to prevent the risk of damaging
your hearing;
b. A breathing mask to avoid the risk of in-
haling hazardous dust;
c. Always wear gloves when handling saw
blades and rough materials. Whenever
practicable, saw blades must be carried
in a container;
16. Use only the transport devices to move
the equipment. Never use the guards
for handling or moving the equipment.
17. While you are moving the machine it is
best to cover the top part of the blade,
e.g. with the guard.
18. Give these safety instructions to all per-
sons who work on the machine.
19. Do not use this saw to cut  re wood.
20. Do not use this saw to cross-cut round-
wood.
21. The machine is equipped with a safety
switch to prevent it from being swit-
ched on again accidentally after a pow-
er failure.
22. If you need to use an extension cable,
make sure its conductor cross-section
is big enough for the saw‘s power con-
sumption. Minimum cross-section: 1.5
mm².
23. If you use a cable reel, the complete
cable must be pulled o the reel.
24. Never load the machine so much that it
cuts out.
25. Always press the workpiece  rmly
against the saw table.
26. Make sure that o -cuts do not catch on
the saw blade crown. Risk of catapul-
ting!
27. Be sure to observe the safety informa-
tion and operating and maintenance
instructions issued by the manufacturer,
as well as the dimensions listed in the
Technical Data.
28. It is imperative to observe the accident
prevention regulations in force in your
F_TS_2000_1_GB_SPK7.indb 20F_TS_2000_1_GB_SPK7.indb 20 04.06.2019 10:19:0004.06.2019 10:19:00
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex F-TS 2000-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex F-TS 2000-1 in the language / languages: English as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info