779785
19
Zoom out
Zoom in
Previous page
1/44
Next page
19
g) Always use saw blades of the correct
size and with a suitable mounting
hole (diamond-shaped or round).
Saw blades that do not match the
mounting parts of the saw will not
rotate truly and will result in a loss of
control.
h) Never use damaged or the incorrect
saw blade assembly material such as,
e.g. fl anges, washers, screws or nuts.
This saw blade assembly material has
been specially designed for your saw,
for safe operation and optimum perfor-
mance.
i) Never get onto the bench-type circu-
lar saw and never use the bench-type
circular saw as a step stool. Serious
injuries could occur if the power tool
topples over or if you come into contact
with the saw blade accidentally.
j) Make sure that the saw blade is
tted in the correct direction of rota-
tion. Do not grinding wheels or wire
brushes with the bench-type circular
saw. If the saw blade is  tted incor-
rectly or accessories are used which are
not recommended, this could lead to
serious injuries.
Additional safety instructions
1. Only use a saw blade which has the
external diameter and hole diameter
speci ed in the original operating inst-
ructions (“Technical data” section).
2. Only use saw blades whose permissible
maximum speed of rotation is not lower
than the maximum spindle speed of the
bench-type circular saw and which are
suitable for the material to be cut.
3. Only  t blades which are well sharpe-
ned and have no cracks or deformati-
ons.
4. Faulty saw blades must be replaced
immediately.
5. It must be possible for the blade to run
freely.
6. Check the saw blade guard for damage
and wear each time before using the
saw.
7. The saw blade guard must lower again
automatically under its own weight af-
ter each cut. The saw blade guard must
lift when the workpiece is pushed in the
direction of the saw blade.
8. Damaged or faulty safety devices have
to be replaced immediately.
9. It is imperative to make sure that all de-
vices which cover the saw blade are in
good working order.
F_TS_2000_1_GB_SPK7.indb 19F_TS_2000_1_GB_SPK7.indb 19 04.06.2019 10:19:0004.06.2019 10:19:00
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex F-TS 2000-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex F-TS 2000-1 in the language / languages: English as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info