779785
23
Zoom out
Zoom in
Previous page
1/44
Next page
23
Check that the equipment after unpa-
cking to ensure that it is complete and
check it for damage which may have
occurred in transit – to prevent hazards.
If you have any doubts, do not use it but
contact our customer service instead.
You will find the service address in our
warranty terms on the warranty card.
Important!
The equipment and packaging material
are not toys. Do not let children play with
plastic bags, foils or small parts. There is
a risk of choking and suff ocating!
Bench-type circular saw
Bench width extension
Laser
Carbide-tipped saw blade
1x 48 teeth / 1x 24 teeth
Splitter
Saw blade guard
Bag with installation materials
Parallel stop
Cross stop
Push stick
Original operating instructions
3. Intended use
The bench-type circular saw is designed for
the slitting and cross-cutting (only with the
cross stop) of all types of timber commensu-
rate with the machine‘s size. The equipment
is not to be used for cutting any type of
round wood.
The equipment is to be operated only with
suitable saw blades (saw blades made of
HM or CV) It is prohibited to use any type of
HSS saw blade and cutting-o wheel. To use
the equipment properly you must also ob-
serve the safety information, the assembly
instructions and the operating instructions
to be found in these operating instructions.
All persons who use and service the equip-
ment have to be acquainted with these ope-
rating instructions and must be informed
about the equipments potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
health and safety at work. The manufacturer
will not be liable for any changes made to
the equipment nor for any damage resulting
from such changes.
Even when the equipment is used as prescri-
bed it is still impossible to eliminate certain
F_TS_2000_1_GB_SPK7.indb 23F_TS_2000_1_GB_SPK7.indb 23 04.06.2019 10:19:0104.06.2019 10:19:01
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex F-TS 2000-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex F-TS 2000-1 in the language / languages: English as an attachment in your email.

The manual is 3.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info