779800
35
Zoom out
Zoom in
Previous page
1/42
Next page
Kapitelüberschrift
33
6. Turn the fixing nut (I) anticlockwise to undo the fixing nut (I).
7. Hold the saw blade carefully with one hand and remove the fixing nut and outer saw
blade flange (H) from the drive shaft.
8. Now remove the saw blade from the drive shaft and carefully draw it up and out of the
saw table.
9. Clean the external and internal saw blade flange carefully, before fitting a new saw
blade.
10. Place a new saw blade on the drive shaft. Observe the rotational direction: The cutting
angle of the teeth must point in the running direction (forwards). The running direction
is usually also marked on the saw blade.
11. Fit the external saw blade flange back on the drive shaft. Ensure the correct alignment
of the outer saw blade flange.
12. Screw the fixing nut tight onto the drive shaft with the hand.
13. Carefully turn the saw blade in the running direction: It must be precisely centred and
must not “wobble”. Check that the saw blade and external saw blade flange are sitting
correctly and align the parts once more, if the saw blade is not precisely centred.
14. Tighten the fixing nut (I) with the saw blade spanner (25).
15. Mount the riving knife, table insert and saw blade guard.
XI. Transport
Turn off the table saw before any transport and disconnect it from the power supply.
Lower the saw blade (3) as far as possible.
Carry the table saw with both hands by lifting it by the fixed saw table. Never use the table
width extension to carry the power tool.
Protect the table saw from knocks, bumps and strong vibrations, such as during transport in
vehicles.
Secure the table saw against overturning and sliding.
Never use the safety devices for handling or transporting purposes.
Operation/Transport
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DX254TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DX254TS in the language / languages: English as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info