Manual Ferrex DC-180E-1 (page 12 of 27) (English)

724581

Zoom out

Zoom in

1/27

cause electrical hazards.

s) Do not operate the power tool near ammable materials.

Sparks could

ignite these materials.

t) Do not use accessories that require liquid coolants.

Using water or other

liquid coolants may result in electrocution or shock.

Further safety instructions for all operations

Kickback and related warnings

Kickback is a sudden reaction to a pinched or snagged rotating wheel, sanding

band, brush or any other accessory. Pinching or snagging causes rapid stalling

of the rotating accessory which in turn causes the uncontrolled power tool to

be forced in the direction opposite of the accessory’s rotation.

For example, if an abrasive wheel is snagged or pinched by the workpiece, the

edge of the wheel that is entering into the pinch point can dig into the surface

of the material causing the wheel to climb out or kick out. The wheel may either

jump toward or away from the operator, depending on direction of the wheel’s

movement at the point of pinching. Abrasive wheels may also break under

these conditions.

Kickback is the result of power tool misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper precautions as

given below.

a) Maintain a rm grip on the power tool and position your body and arm

to allow you to resist kickback forces.

The operator can control kickback

forces, if proper precautions are taken.

b) Use special care when working corners, sharp edges etc. Avoid

bouncing and snagging the accessory.

Corners, sharp edges or bouncing

have a tendency to snag the rotating accessory and cause loss of control or

kickback.

c) Do not attach a toothed saw blade.

Such blades create frequent kickback

and loss of control.

d) Always feed the bit into the material in the same direction as the

cutting edge is exiting from the material (which is the same direction

as the chips are thrown).

Feeding the tool in the wrong direction causes

the cutting edge of the bit to climb out of the work and pull the tool in the

direction of this feed.

e) When using rotary les, cut-o wheels, high-speed cutters or tungsten

carbide cutters, always have the work securely clamped.

These wheels

will grab if they become slightly canted in the groove, and can kickback.

When a cut-o wheel grabs, the wheel itself usually breaks. When a rotary

le, high-speed cutter or tungsten carbide cutter grabs, it may jump from

the groove and you could lose control of the tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DC-180E-1 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferrex DC-180E-1 Manual

Product: