724581

Ferrex DC-180E-1 Manual

13
Zoom out
Zoom in
Previous page
1/27
Next page
Safety Warnings Specic for Grinding and Abrasive
Cutting-O Operations:
a) Use only wheel types that are recommended for your power tool and
only for recommended applications. For example: do not grind with the
side of a cut-o wheel.
Abrasive cut-o wheels are intended for peripheral
grinding, side forces applied to these wheels may cause them to shatter.
b) For threaded abrasive cones and plugs use only undamaged wheel
mandrels with an unrelieved shoulder ange that are of correct size
and length.
Proper mandrels will reduce the possibility of breakage.
c) Do not “jam” a cut-o wheel or apply excessive pressure. Do not
attempt to make an excessive depth of cut.
Overstressing the wheel
increases the loading and susceptibility to twisting or snagging of the wheel
in the cut and the possibility of kickback or wheel breakage.
d) Do not position your hand in line with and behind the rotating wheel.
When the wheel, at the point of operation, is moving away from your hand,
the possible kickback may propel the spinning wheel and the power tool
directly at you.
e) When wheel is pinched, snagged or when interrupting a cut for any
reason, switch o the power tool and hold the power tool motionless
until the wheel comes to a complete stop. Never attempt to remove
the cut-o wheel from the cut while the wheel is in motion otherwise
kickback may occur.
Investigate and take corrective action to eliminate the
cause of wheel pinching or snagging.
f) Do not restart the cutting operation in the workpiece. Let the wheel
reach full speed and carefully re-enter the cut.
The wheel may bind, walk
up or kickback if the power tool is restarted in the workpiece.
g) Support panels or any oversized workpiece to minimize the risk of
wheel pinching and kickback.
Large workpieces tend to sag under their
own weight. Supports must be placed under the workpiece near the line of
cut and near the edge of the workpiece on both sides of the wheel.
h) Use extra caution when making a “pocket cut” into existing walls or
other blind areas.
The protruding wheel may cut gas or water pipes,
electrical wiring or objects that can cause kickback.
10
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DC-180E-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DC-180E-1 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info