724581

Ferrex DC-180E-1 Manual

11
Zoom out
Zoom in
Previous page
1/27
Next page
i) Wear personal protective equipment. Depending on application, use
face shield, safety goggles or safety glasses. As appropriate, wear
dust mask, hearing protectors, gloves and workshop apron capable
of stopping small abrasive or workpiece fragments.
The eye protection
must be capable of stopping ying debris generated by various operations .
The dust mask or respirator must be capable of ltrating particles generated
by your operation. Prolonged exposure to high intensity noise may cause
hearing loss.
j) Keep bystanders a safe distance away from work area. Anyone entering
the work area must wear personal protective equipment.
Fragments of
workpiece or of a broken accessory may y away and cause injury beyond
immediate area of operation.
k) Hold power tool by insulated gripping surfaces only, when performing
an operation where the cutting accessory may contact hidden wiring or
its own cord.
Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric
shock.
l) Always hold the tool rmly in your hand(s) during the start-up.
The
reaction torque of the motor, as it accelerates to full speed, can cause the
tool to twist.
m) Use clamps to support workpiece whenever practical. Never hold a
small workpiece in one hand and the tool in the other hand while
in use.
Clamping a small workpiece allows you to use your hand(s) to
control the tool. Round material such as dowel rods, pipes or tubing have
a tendency to roll while being cut, and may cause the bit to bind or jump
toward you.
n) Position the cord clear of the spinning accessory.
If you lose control, the
cord may be cut or snagged and your hand or arm may be pulled into the
spinning accessory.
o) Never lay the power tool down until the accessory has come to a
complete stop.
The spinning accessory may grab the surface and pull the
power tool out of your control.
p) After changing the bits or making any adjustments, make sure
the collet nut, chuck or any other adjustment devices are securely
tightened.
Loose adjustment devices can unexpectedly shift, causing loss
of control, loose rotating components will be violently thrown.
q) Do not run the power tool while carrying it at your side.
Accidental
contact with the spinning accessory could snag your clothing, pulling the
accessory into your body.
r) Regularly clean the power tool’s air vents.
The motor’s fan will draw the
dust inside the housing and excessive accumulation of powdered metal may
8
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex DC-180E-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex DC-180E-1 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info