Manual Ferm TDM1020 - FTB-13NL (page 12 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632652

Zoom out

Zoom in

1/52

Ferm 93

SØJLEBOREMASKINE MED LASER

Lœs denne brugsanvisning godt igennem før maskinen tages i brug. Sørg for at De

kender maskinens funktion og betjening. Vedligehold maskinen i følge

instruktionerne, for at maskinen altid kan fungere optimalt. Bevar denne

brugsanvisning og den vedlagte dokumentation til maskinen.

Beskrivelse

Deres søjleboremaskine er blevet designet til at bore huller i træ, metal og plastik.

Indhold

1. Information om maskinen

2. Sikkerhedsforskrifter

3. Montage

4. Brug

5. Vedligeholdelse

1. INFORMATION OM MASKINEN

Tekniske specifikationer

Beskrivelse

Fig. A

1. Tænd/sluk-kontakt

2. Motorkasse

3. Stativ

4. Opbevaringsrum

5. Bord

6. Borepatron

7. Sikkerhedsafskærmning

8. Boreløftestang

Spœnding 230 V~

Frekvens 50 Hz

Optaget effekt 350 W

Omdrejninger, ubelastet 580 - 2650/min

Omdrejninger 5

Borehovedets kap. 13 mm

Spindelkegle MT2

Bordpladens mål 170 x 152 mm

Bordpladens mål (med udvidelsesstykkerne) 170 x 195 mm (max. 272 mm)

Højde 580 mm

Vœgt 26.0kg

Lpa (lydtryk) 62.8 dB(A)

Lwa (lydeffektniveau) 75.8 dB(A)

FIN

12 Ferm

• Screw the knobs (20) onto the wheel.

Mounting the safety guard

Fig. B5

• Mount the safety guard (7) onto the collar (21).

• Secure the guard by tightening the clamp screw (29).

Mounting the chuck

Fig. B6

• Open the safety guard (7).

• Slide the chuck (6) onto the drive spindle (23).

4. OPERATION

Inserting and removing a drill

Fig. C

• Open the safety guard (7).

• Open the chuck (6).

• Insert the drill into the chuck.

• Fasten the chuck by hand.

• Fasten the chuck firmly by inserting the chuck key in one of the holes in the side of the

chuck and turning it clockwise.

• Shut the safety guard.

• In order to remove a drill, proceed in reverse order.

• Before inserting or removing a drill, always pull the plug from the wall socket.

Setting the depth stop

Fig. D

The depth stop is used to set the maximum drilling depth.

• Set the required drilling depth by rotating the depth stop wheel (24) to the defined value.

Adjusting the table

Fig. E

The table can be height-adjusted, turned and toppled.

Height adjustment:

• Slacken the locking handle (14).

• Adjust the table (5) to the required height.

• Tighten the locking handle.

Turning:

• Slacken the locking handle (14).

• Turn the table (5) to the required position.

• Tighten the locking handle.

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TDM1020 - FTB-13NL in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm TDM1020 - FTB-13NL Manual

Product: