Manual Ferm TDM1020 - FTB-13NL (page 11 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632652

Zoom out

Zoom in

1/52

Ferm 11

Replacing cables or plugs

Immediately throw away old cables or plugs when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the power input of the machine. The

minimum conductor size is 1.5 mm

. When using a cable reel always unwind the reel

completely.

3. ASSEMBLY

Assembling the machine

Always use the following procedure, in the order given, when assembling the machine:

• Mount the stand.

• Mount the table.

• Mount the head.

• Mount the safety guard.

• Mount the chuck.

• Remove the anti-corrosive oil on the uncovered metal parts using a cloth and a little

parrafin oil. Proceed with greasing the parts with machine lubricating oil.

If parts are missing, do not assemble the machine, do not plug in and do not switch

on the machine until the missing parts have been mounted according to the

instructions.

Check before operation:

• That the table can be moved smoothly;

• That the drill lift can be moved up and down smoothly;

• That the machine does not shake when it is switched on.

Mounting the stand

Fig. B1

Install the foot (11) on a level and solid surface.

• Slide the foot over the pillar (12) in the orientation as shown.

• Mount the pillar using the fasteners (13).

Mounting the table

Fig. B2

• Slide the table (5) over the pillar (12).

• Tighten the locking handle (14).

Mounting the head

Fig. B3 + B4

• Place the head (15) on the top of the pillar (12).

• Firmly tighten the Allen screws (10) to keep the head in place.

• Place the height adjustment wheel (17) onto the shaft (18) and tighten the screw (19).

FIN

94 Ferm

9. Dybdebelægning

10. Laser tænd/sluk-kontakt

Kontrollér først, om maskinen ikke er beskadiget under transporten og om alle delene er til

stede.

2. SIKKERHEDSFORSKRIFTER

Forklaring til symboler

I denne brugsanvisning og/eller på maskinen bruges følgende symboler:

Læs instruktionerne.

I overensstemmelse med relevante sikkerhedsstandarder i europæiske direktiver.

Indebærer risiko for personskade, livsfare eller beskadigelse af maskinen, hvis

instruktionerne i brugsanvisningen ikke følges.

Angiver risiko for elektrisk stød.

Tag straks stikket ud af stikkontakten, hvis ledningen beskadiges og i forbindelse

med vedligeholdelse

Advarsel! Laserstråle! Se ikke ind i laserstrålen og ret den ikke mod andre

personer, når den er tændt.

Brug beskyttelsesbriller.

Hold tilstedeværende på afstand.

Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på

en genbrugsplads.

Yderligere sikkerhedsforskrifter

Ved anvendelse af elektriske mas kiner skal man altid følge de lokalt gœldende

sikkerhedsforskrifter i forbindelse med brandfare, fare for elektrisk stød og

legemensbeskadigelse. Lœs udover de nedenstående instruktioner også

sikkerhedsforskrifterne i den separat vedlagte sikkerhedsfolder. Bevar instruktionerne godt!

• Maskinen må kun tilsluttes til et strømnet med jordforbindelse.

• Man må kun benytte tre-kabelkoret forlængerledninger.

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm TDM1020 - FTB-13NL in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm TDM1020 - FTB-13NL Manual

Product: