Manual Ferm MSM1030 - FKZ-210 (page 7 of 72) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

634078

Zoom out

Zoom in

1/72

Ferm

Use a dust mask or dust hood to prevent the •

inhalation of (harmful) dust.

Wear gloves when you exchange the saw •

blade or when rough material is to be sawn. It

is best to keep saw blades in a separate

holder to prevent anyone getting hurt.

When the machine is equipped with a laser, •

this may not be replaced by a different type of

laser. Repairs may only be carried out by the

laser manufacturer or a recognised specialist.

The operator should wear ear protectors to •

reduce any damage to hearing.

To prevent accidents occurring by the •

accidental switching on of the machine, the

plug must always be pulled out of the socket

before adjustment of the stop or the saw head

is carried out, when changing blades or

accessories, and when maintaining the

machine.

To prevent electric shocks, when plugging the •

plug into the socket the metal pins must not

be touched in any way whatsoever.

Never use the cord to pull the plug out of the •

socket. Keep the cord away from oil, heat and

sharp objects.

Never apply a cleaning or lubrication agent to •

a saw blade that is still revolving.

To prevent fires, never use the machine in the •

vicinity of flammable liquids, vapours or

gases.

Always use original accessories: others may •

cause wounding.

Always choose the right saw blade in relation •

to the material to be sawn.

Ensure that during operation, the swinging •

guard functions properly. It must move freely

and be able to close by itself. It should never

be jammed in the open position.

Do not work with material containing •

asbestos.

Protect the saw blade from strikes and •

shocks. Do not apply side pressure to the saw

blade.

Transport

Before all work on the machine, pull the

mains plug.

Check that all locks and tensioning devices are

secure:

Turn the locking knob on the turntable •

counterclockwise.

Slide the machine completely towards •

yourself

Turn the locking knob on the turntable •

clockwise to lock the slide-function

Unlock the pin on the right hand side of the •

machine

Push the button in the handgrip to unlock the •

saw blade protection

Push the machine completely downwards•

Lock the pin on the right hand side again•

While the machine is in use

With frequent use of the machine, do not let

routine lead to mistakes. Remember that a slight

lack of concentration can lead to serious injuries

in a fraction of a second.

Before beginning to saw, make sure that the •

protective hood is in the right position.

Before cutting the first cut, let the machine run •

for a short while. If you hear any unusual

sounds or observe any strong vibration, turn

the machine off and take the plug out of the

socket, and then find the cause of the

problem. Do not switch the machine on again

until the cause has been found and the fault

repaired.

Make sure that the piece of work being sawn •

off does not get stuck in place, do not hold it or

clamp it and no not secure it against the stop.

It must be able to move freely along the side

of the saw blade. When this is not possible the

piece of work being sawn can be trapped by

the saw blade and be flung about.

Avoid placing your hands anywhere where in •

the case of a sudden movement one or both

hands can come into contact with the saw

blade.

Let the saw get up to full revolutions before •

you start sawing.

Press the saw head downwards so that the •

motor is not overloaded and the saw blade

does not get jammed.

If you need to remove jammed material, first •

let the saw blade stop turning completely,

switch the motor off and take the plug out of

the socket.

At the end of the sawing process, keep the •

saw head downwards, switch off the machine

and wait until all moving parts has come to a

stop before you take your hands off the

machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSM1030 - FKZ-210 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm MSM1030 - FKZ-210 Manual

Product: