Manual Ferm MSM1030 - FKZ-210 (page 6 of 72) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

634078

Zoom out

Zoom in

1/72

Ferm

Indicates electrical shock hazard.

Keep bystanders at a distance

Immediately unplug the plug from the

mains electricity in the case that the

cord gets damaged and during

maintenance

Wear eye and ear protectors

Before eache use of the saw

Check the machine. If any part of the machine is

missing, bent or in any other way unusable, or

when an electrical defect occurs, turn the machine

off and take the plug out of the socket. Replace all

missing, damaged or defective parts before using

the machine again.

To fix the saw blade in the slot and to prevent •

the piece of work from moving, follow the

instructions below.

Choose a suitable saw blade for the work. •

Use the crosscut saw only for sawing wood

and wood derivatives or light metal such as

aluminium. Other materials can jump away or

get caught in the saw blade or give rise to

other dangers.

The arrow marked on the saw blade, which •

indicates the direction of rotation, must point

in the same direction as the arrow marked on

the machine. The saw blade teeth must point

downwards on the front of the saw.

Check that the saw blade is sharp, •

undamaged and correctly aligned. After

unplugging the machine, push the saw hood

downwards. Rotate the saw blade by hand

and check that it revolves freely. Put the

machine in the 45° position and check free

rotation again. If the blade touches anything it

must be adjusted.

Keep the saw blade and the clamping surface •

for the clamps clean.

The saw blade flange must always be •

mounted with the notch tightened towards the

saw blade.

Check that all tensioning devices and locks •

are secure and that no part has too much play

in it.

Never just use your hands for sawing.•

Always press the piece of work firmly against •

the stop, so that it cannot tilt or turn while

sawing. No impurities must gather underneath

the piece of work being sawn.

Make sure that the piece of work cannot move •

after being sawn, for example because it is

not completely supported by the surface of

the machine.

For sawing pieces of work that are not •

supported by the full surface, use some

padding or another machine.

Replace any worn-out table inserts.•

Only use saw blades recommended by the •

manufacturer (EN-847-1).

Never use HS (High Speed) saw blades.•

Check that the sawn off bits can be removed •

sideways from the saw blade, otherwise they

can get caught on the blade and flung about.

Never saw more than one piece of work at the •

same time.

Be extremely careful when sawing large, very •

small or awkward pieces of work.

Be careful when sawing double mitre joints.•

Use additional supports (tables, sheer-legs •

and the like) for long pieces of work that can

tip over and topple off the machine if they are

not properly secured.

Never use the machine to saw pieces of work •

that are so small that they cannot be secured

safely.

When sawing profile sections the work must •

be carried out such that the piece of work

cannot slide away and the saw blade cannot

become jammed. A profiled piece of work

must lie flat or be held in place by an

attachment so that toppling or sliding during

the work is prevented.

Round pieces of work such as tubes must be •

well secured, otherwise these can revolve and

the danger exists that the saw blade catches

in them. Always keep the piece of work on the

table and against the stop using a suitable

accessory or attachment.

Make sure that the piece of work does not •

have any nails or other foreign objects in it.

User safety

Make sure you have a clean and tidy working •

environment.

Make sure the working environment is well lit.•

The user of the machine must be instructed in •

the use, adjustment and operation of the

machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm MSM1030 - FKZ-210 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm MSM1030 - FKZ-210 Manual

Product: