Manual Ferm CSM1051 (page 12 of 56) (English, German, Dutch, French)

798918

Zoom out

Zoom in

1/56

2. Sawing on a sawhorse:

Hold the electric chainsaw steady with both

hands, keeping the saw in front of you while

sawing. Once the saw is through the wood, guide

the machine passed you on the right (1). Hold

your left arm as straight as you can (2). Watch out

for the falling trunk. Position yourself to prevent

any danger from the separated trunk. Watch your

feet. The trunk may cause injuries when falling.

Keep your balance (3).

Limbing

Limbing is the designation for the sawing off of

branches and boughs from a felled tree.

Many accidents occur during the removal of

branches. Never cut tree limbs when you are

standing on the log. Keep the spring-back area in

mind if branches are under tension.

• Do not remove support branches until after the

sawing off.

• Branches under tension must be sawed from

below to above, in order to prevent jamming of

the chainsaw.

When working on thicker branches, use the same

technique as when you are sawing up a felled trunk.

• Work to the left of the log and as near as

possible to the electric chainsaw. As far as

possible, the weight of the saw should rest on

the log.

• Change position to saw off branches on the

other side of the trunk.

• Branches sticking out are cut off separately.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Only use original spare parts. Allow the device to

cool off before undertaking any maintenance or

cleaning work. There is a danger of burns!

Use cut-protection gloves when handling

the chain or the chain bar. Risk of cuts!

Cleaning

• Clean the machine thoroughly after every use.

In this way, you extend the life of the machine

and avoid accidents.

• Keep the gripping handles free of petrol, oil

or grease. Clean the gripping handles, where

appropriate, with a moist cloth soaked in soap.

Use no solvents or petrol for cleaning!

• Clean the saw chain after every use. Use a

paint brush or wipe for that. Do not use any

liquids to clean the chain. After cleaning, oil the

chain lightly with chain oil.

• Clean the ventilation slots and the surfaces of

the machine with a paint brush, whisk or dry

cloth. Do not use any liquids for cleaning.

Saw chain oiling

Clean and oil the chain regularly. This keeps the

chain sharp and achieves optimum machine

performance. Damage due to insufficient

maintenance of the saw chain will invalidate the

warranty.

Remove the battery and use cut-

resistant gloves when working with the

chain or with the blade bar.

The blade bar and chain must never be

operated without oil. If the cordless

pruner saw is used with too little oil, the

cutting performance and lifespan of the

saw chain will decrease as the chain will

become blunt more quickly. You can

identify when there is too little oil if

smoke develops or the blade bar

changes colour.

Switch off the device and remove the

battery before carrying out any

maintenance work.

• Oil the chain after cleaning, after 10 hours of

use or at least once a week, whichever comes

first.

• Before oiling, the blade bar, especially the

teeth of the blade bar, must be thoroughly

cleaned. Use a hand brush and a dry cloth for

this purpose.

• Oil the individual chain links using an oil

syringe with a needle tip (available from

specialist dealers). Apply individual drops of

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1051 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CSM1051 Manual

Product: