798918
9
Zoom out
Zoom in
Previous page
1/56
Next page
9
EN
Do not use any accessories that are not
recommended. This can result in electric
shock or fire.
This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with
the appliance.
Children or persons unfamiliar with these
instructions must not operate the chain saw.
Local regulations may restrict the age of the
operator.
The user is responsible for accidents or
hazards occurring to other people or their
property.
Use the chain saw only in daylight or in good
artificial light.
Never operate the chain saw with defective
guards or without the guard in place.
Keep all nuts, bolts and screws tight to ensure
that the chain saw is always in a safe working
condition.
Hold the product securely with both hands.
Replace worn or damaged parts for safety.
Do not attempt to repair the machine unless
you are qualified to do so.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain. Due
to its construction and build, this electric tool may
present the following hazards:
a) Cuts
b) Ear damage if working without ear protection.
c) Damage to your health caused by swinging
your hands and arms when operating the
appliance for longer periods of time or if the
unit is not held or maintained properly.
Warning! During operation, this electric
tool generates an electromagnetic field
which, under certain circumstances, may
impair the functionality of active or
passive medical implants. To reduce the
risk of serious or lethal injuries, we
recommend that persons with medical
implants consult their doctor and the
manufacturer of their medical implant
before operating the machine.
3. ASSEMBLY
Always wear protective gloves when
working with the chainsaw and employ
only original parts
Before putting the electric chain saw into
operation, you must:
- adjust the saw chain tension,
- lubricate the saw chain
- charge and insert the battery
Assembling the blade bar and saw chain
Switch off the device and remove the
battery before carrying out any
maintenance work.
1. Place the device on a level surface.
2. Turn the Mounting knob (10) of the sprocket
cover in an anticlockwise direction ( ) in
order to remove the sprocket cover (9).
3. Spread out the saw chain (12) in a loop so that
the cutting edges are aligned in a clockwise
direction. Use the graphical symbol on the
blade bar or above the chain sprocket (17) as a
guide to align the saw chain (12).
Direction of travel of saw
chain
4. Place the saw chain (12) into the blade bar
groove. To assemble, hold the blade bar
(11) tilted upwards at an angle of approx. 45
degrees in order to be able to guide the saw
chain (12) more easily onto the chain sprocket
(17).
5. Place the blade bar (11) and saw chain (12). It
is normal for the saw chain (12) to sag.
6. Turn the screw for the chain quicktensioning
system (8) until the chain tensioner pin (19) is
approximately level with the mounting screw
(16).
7. Place the sprocket cover (9) into position. The
chain tensioner pin (19) on the inside of the
sprocket cover (9) must be guided into the
chain tension pin holder.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1051 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info