763247

Ferm AGM1048 - FAG-115-500 Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
EN
6Ferm
Do not use the machine without the guard. •
Securely mount the guard for maximum
safety. Make sure that the user is protected
from the grinding disc as much as possible.
Make sure that the workpiece is properly •
supported or fixed.
Wear safety goggles. Wear hearing protection. •
Wear a dust mask. If necessary, use other
protective means, such as safety gloves,
safety shoes, etc. Risk of personal injury.
Keep bystanders away from the work area. •
Make sure that all persons in the work area
wear protective equipment. Risk of personal
injury.
Keep the mains cable away from the rotating •
grinding disc. If the mains cable touches the
rotating grinding disc, your hands or arms may
come in contact with the grinding disc.
Risk of personal injury.
Hold the machine by the insulated gripping •
surfaces where the grinding disc may contact
hidden wiring or the mains cable. If the
grinding disc contacts a ’live’ wire, the
exposed metal parts of the machine can also
become ’live’. Risk of electric shock.
Do not use the machine while carrying it at •
your side. Risk of personal injury.
Do not use the machine on workpieces •
requiring a maximum grinding depth that
exceeds the maximum grinding depth of the
grinding disc.
Do not use accessories that require liquid •
coolants. Risk of electric shock.
Do not use the machine near flammable •
materials. Risk of fire.
Do not work materials containing asbestos. •
Asbestos is considered carcinogenic.
Do not work metal with a magnesium content •
of more than 80%.
Beware that the grinding disc continues to •
rotate for a short period after switching off the
machine. Do not attempt to bring the grinding
disc to a standstill yourself.
Never put the machine down on a table or •
a workbench before it has been switched off.
Regularly clean the ventilation slots. •
Risk of electric shock.
Kickback is a sudden reaction to a pinched, bound
or twisted grinding disc, which causes the machine
to lift up and out of the workpiece towards the user.
If the grinding disc is pinched or bound tightly by
the cut, the grinding disc jams and the machine is
rapidly driven back towards the user. If the
grinding disc is twisted in the cut, the back edge of
the grinding disc can dig into the top surface of the
workpiece, which causes the grinding disc to climb
out of the cut and jump back towards the user.
Kickback is the result of incorrect use of the
machine and/or incorrect operating procedures or
conditions. Kickback can be avoided by taking
proper precautions:
Firmly hold the machine with both hands. •
Position your arms to resist kickback forces.
Position your body to either side of the
grinding disc, but not in line with the grinding
disc. Kickback can cause the grinding disc to
jump backwards. If proper precautions are
taken, kickback forces can be controlled by
the user.
Be extra careful when using the machine on •
corners, sharp edges, etc. Make sure that the
grinding disc does not become jammed.
Risk of kickback.
If the grinding disc jams or if you interrupt a cut •
for any reason, release the on/off switch and
hold the machine motionless in the material
until the grinding disc comes to a complete
standstill. Never attempt to remove the
machine from the workpiece or pull the
machine backward while the grinding disc is in
motion. Risk of kickback.
Do not use blunt or damaged grinding discs. •
Unsharpened or incorrectly mounted grinding
discs produce narrow cuts, which causes
excessive friction and kickback and increases
the risk of the grinding discs becoming
jammed.
Do not use toothed saw blades. Do not use •
woodcarving blades for saw chains.
Risk of personal injury.
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
Do not use the machine if the mains cable or •
the mains plug is damaged.
Only use extension cables that are suitable for •
the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use a
extension cable reel, always fully unroll the
cable.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1048 - FAG-115-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1048 - FAG-115-500 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info