763247

Ferm AGM1048 - FAG-115-500 Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
EN
5
Ferm
ANGLE GRINDER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for many
years to come.
Safety warnings
WARNING
Read the enclosed safety warnings, the
additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result
in electric shock, fire and/or serious
injury. Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user manual
or on the product:
Risk of personal injury.
Risk of electric shock.
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
Risk of flying objects. Keep bystanders
away from the work area.
Wear ear and eye protection
Wear protective gloves
Do not press the spindle lock button while
the motor is running.
Risk of fire.
Double insulated.
Additional safety warnings for angle grinders
The machine has been designed for use as a •
grinder or cut-off machine. The machine is not
suitable for operations such as sanding, wire
brushing, polishing, etc. Risk of personal
injury.
Do not use accessories which are not •
specifically designed and recommended by
the manufacturer. Risk of personal injury.
Inspect the machine and the accessories •
before each use. Do not use accessories
which are bent, cracked, or otherwise
damaged. If the machine or one of the
accessories is dropped, inspect the machine
or the accessory for damage. If necessary,
replace the accessory.
Let the machine run at no load in a safe area •
after mounting the accessories. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
Make sure that the maximum speed for the •
grinding disc is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
Only use grinding discs with the correct •
thickness and outside diameter. Refer to the
rating plate on the machine.
Make sure that spindle diameter of grinding •
discs, spacers, tension nuts, etc. correspond
to the diameter of the spindle on the machine.
Make sure that the grinding disc is properly •
mounted. Do not use adapters or other aids to
mount grinding discs with another spindle
diameter.
Only use grinding discs that are recommended •
by the manufacturer. Only use guards that are
specifically designed for the grinding disc.
Only use grinding discs that are suitable for •
the application. For example: do not grind with
the side of a cut-off disc.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1048 - FAG-115-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1048 - FAG-115-500 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info