70125

Falcon Classic 90 Manual

29
Zoom out
Zoom in
Previous page
1/115
Next page
English
28
The Handyrack
The Handyrack fits to the left hand
oven door only. The maximum weight
that can be held by the Handyrack is
5.5kg. It should only be used with the
supplied meat tin, which is designed
to fit the Handyrack. Any other vessel
could be unstable.
When the Handyrack is used in its
highest position, other dishes can be
cooked on the bottom shelf position
of the oven.
When the Handyrack is used in its
lowest position, other dishes can be
cooked on the second shelf position
of the oven.
To fit the Handyrack, locate one side
of it on the door bracket.
Then spring the other side out to clip
it onto the other bracket.
Tall oven shelves
The tall oven is supplied with four nor-
mal cooking shelves
and a plate warming shelf.
When using the tall oven you can
cook on all four shelves at the same
time; but make sure they are well
spaced out to allow the hot air to cir-
culate.
The clock
You can use the timer to turn the ov-
ens on and off. Check clock is set to
the time of day.
To set the time of day
Press and hold as shown. At the
same time, press (-) or (+) until the
correct time shows. Don’t forget it’s a
24-hour clock. If you make a mistake
or press the wrong button, turn off the
power supply for a minute or two and
start again.
To time something that’s
cooking (minute minder)
Press and hold ( ). At the same time
press (-) or (+) until the time you want
to cook for is shown.
You can check time remaining by
pressing ( ) and cancel the beeper
by pressing ( ).
To start and stop the
oven automatically
Before you set the clock, you must
have two numbers clearly in mind.
The ‘cook period’, which is the period
of time you want the oven to cook.
The ‘stop time’, which is the time of
day you want the oven to stop cook-
ing.
You cannot set a start time directly -
this is set automatically by setting the
cooking period and stop time.
Press and hold as shown below.
At the same time press (-) or (+) until
your required ‘cook period’ shows.
Then press and hold as shown below.
At the same time press (-) or (+) until
your required ‘stop time’ shows.
AUTO will show in the display.
Set the oven to the required tempera-
ture. When your cooking is finished
the beeper sounds. TURN THE
OVEN KNOB TO THE OFF POSI-
TION FIRST, then press ( ) once to
stop the beep, press ( ) again to re-
turn to manual cooking.
If you are out, don’t worry about the
beeper going off, it stops after a
while. When you return, TURN THE
OVEN KNOB TO 0 FIRST, then
press ( ) twice, to return to manual
cooking.
AUTO is showing, you
want to reset to manual
cooking.
When cancelling an automatic set-
ting, any cooking time already set
must be returned to 0.00 before you
can return to manual, by pressing the
( ) button.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon Classic 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon Classic 90 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info