560694
14
Zoom out
Zoom in
Previous page
1/40
Next page
12
C850 532015 Rev. A
f
g
e
FCC b
RCL a
RCL
ROP
FCO
FCC
FCO c
ROP d
ENGLISH
14. Set the F003 DECELERATION TIME and A021 OPERATING SPEED in the inverter (see section 12.2)
15. Do not modify the deceleration points (ROP/RCL) and/or stops (FCO/FCC) before having set the deceleration time and speed
of the inverter (see section 12.2)
16. Tighten the central locking screw of the limit switch unit (Fig. 22 ref. e).
17. Manually place the sliding leaf at half its travel and ensure that the limit switch position corresponds to Fig. 21
18. Refit the limit switch cover.
19. Manually close the sliding leaf.
20. Prepare the operator for NORMAL operation, as described in section 8.
21. Ensure that there is no danger and the safety devices are operating correctly.
22. Give an OPEN pulse and verify correct operation.
The maximum adjustable STOP SPACE is 5 m.
The operator is supplied with factory settings for automating gates with RIGHT-HAND opening. If the gate
requires LEFT-HAND opening, the association of the related opening and closing limit switches is reversed. For
these operations, follow the instructions contained in paragraph 11.4.9 Reversing Gate Opening Connections
from Right to Left.
FCO = opening limit switch (screw c)
FCC = closing limit switch (screw
b)
ROP = start of opening deceleration (screw
d)
RCL = start of closing deceleration (screw
a)
Fig. 20
Fig. 21 Fig. 22
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FAAC C850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FAAC C850 in the language / languages: English as an attachment in your email.

The manual is 13,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info