560694

FAAC C850 Manual

12
Zoom out
Zoom in
Previous page
1/40
Next page
10
C850 532015 Rev. A
OFF
b
a
a
a
a
a
a
L
N
PE
ENGLISH
Important notes for installing the rack:
Check that during gate travel, all the rack
elements remain on the pinion.
Do not weld the rack elements together or to
the spacers.
Once rack installation is complete, to guarantee
correct meshing with the pinion, lower the
gearmotor approximately 1.5 - 2 mm using the
provided adjustment screws (Fig. 17 ref. a).
Tighten the fixing nuts (Fig. 9 ref. d) with 80
Nm of torque.
Tighten the fixing nuts (Fig. 10 ref. f) with 40
Nm of torque.
Do not use grease or other lubricating products
between the pinion and the rack (Fig. 17)
Manually check that the gate reaches the
mechanical stops smoothly and that there is
not friction during its travel.
6 OPERATION
6.1 CONNECTING THE CONTROL BOARD
Before carrying out any work on the board
(connections, programming, maintenance)
always cut off the electrical power.
• Follow points 10, 11, 12, 13 and 14 of the
GENERAL SAFETY REGULATIONS.
• Following the instructions shown in Fig. 3, place the
cables in the runners and make the electrical connections
with the chosen accessories.
• Always separate the power cables from the control and safety
cables (button, receiver, photocells, etc.).
• To avoid possible electrical disturbance, use separate
sheathing.
6.1.1 CONNECTIONS MADE BY THE INSTALLER
Connect the 230 VAC line (see fig. 18):
• L: Phase
• N: Neutral
• PE: Earth
6.1.2 ELECTRONIC CONTROL UNIT
Inside the operator, the electronic control unit is secured to a
bracket (Fig. 19 ref. a) and protected by a cover (Fig. 19 ref. b).
To correctly connect and program the control
unit, remove the cover and follow the instructions
in section 11 (E850 Electronic Control Unit).
Dimensions in mm Fig. 17
Fig. 18
Fig. 19
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FAAC C850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FAAC C850 in the language / languages: English as an attachment in your email.

The manual is 13,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info