Manual FAAC C850 (page 11 of 40) (English)

560694

Zoom out

Zoom in

1/40

C850 532015 Rev. A

ENGLISH

5.4 INSTALLING THE RACK

5.4.1 WELD-ON STEEL RACK (Fig. 13)

Before installing the rack, release the gearmotor,

as described in paragraph 8.

1. Install the three threaded pawls on the rack element,

positioning them on top of the slot. In this way the play on

the slot will make it possible to make future adjustments.

2. Manually set the leaf in closing position.

3. Evenly rest the first section of the rack on the pinion and weld

the threaded pawl to the gate, as shown in Fig. 15.

4. Manually move the gate, ensuring that the rack is NOT

resting on the pinion (leave 1.5 mm of clearance) and weld

the second and third pawls.

5. Draw up another rack element to the previous one using

a piece of rack to mesh the teeth of the two elements, as

shown in Fig. 16.

6. Manually move the gate and weld the three threaded pawls,

continuing until the gate is completely covered.

5.4.2 SCREW-ON STEEL RACK (Fig. 14)

Before installing the rack, release the gearmotor,

as described in paragraph 8.

1. Manually set the leaf in closing position.

2. Rest the first piece of rack level on the pinion and place the

spacer between the rack and the gate, positioning it on top of

the slot. In this way the play on the slot will make it possible

to make future adjustments.

3. Mark the drilling point on the gate. Drill 6.5 mm Ø hole and

thread using an 8 mm Ø male. Tighten the bolt

4. Manually move the gate, ensuring that the rack is NOT resting

on the pinion (leave 1.5 mm of clearance) and repeat the

operations from point 3.

5. Draw up another rack element to the previous one using

a piece of rack to mesh the teeth of the two elements, as

shown in Fig. 16.

6. Manually move the gate and, as for the first element, proceed

with securing until the gate is completely covered.

Fig. 13

Fig. 14

Fig. 15 Fig. 16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of FAAC C850 in the language / languages: English as an attachment in your email.

The manual is 13,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

FAAC C850 Manual

Product: