379757
57
Zoom out
Zoom in
Previous page
1/64
Next page
57
GB
TROUBLESHOOTING GUIDE
No. Problem Course Solution
1
Smoke from ventilation
hole when baking
Some ingredients adhere to the heat
element or nearby, for the rst use, oil
remained on the surface of heat element
Disconnect the bread maker
from the mains power supply
and clean the heat element,
but be careful not to burn
yourself. During the rst use,
conduct dry operating and
open the lid.
2
Bread bottom crust is too
thick
Keep bread warm and leave bread in
the bread pan for a long time, as a result
water has lost too much
Take bread out soon without
keeping it warm
3
It is very difcult to take
bread out
Kneader adheres tightly to the shaft in
bread pan
After taking bread out, put
hot water into bread pan
and immerge kneader for 10
minutes, and then take it out
and clean.
4
Stir ingredients not
evenly and bake badly
1.selected program menu is improper
Select the proper program
menu
2. After operating, open cover several
times and bread is dry, no brown
crust color
Don’t open cover at the last
rise
3. Stir resistance is too large, as a
result, the kneader almost cannot
rotate and stir adequately
Check kneader hole, then take
bread pan out and operate
without load. If still not normal,
contact the authorized service
facility.
5
Display “H:HH” after
pressing “START /
STOP” button
The temperature in bread maker is too
high to make bread.
Press “START / STOP” button
and disconnect from the mains
power, then take bread pan
out and open the lid until the
bread maker cools down
6
Hear the motor noises
but dough isn’t stirred
Bread pan is xed improperly or dough
is too large to be stirred
Check whether bread pan
is xed properly, dough is
made according to recipe and
the ingredients is weighed
accurately
7
Bread size is so large as
to push cover
Yeast is too much or our is excessive
or water is too much or environment
temperature is too high
Check the above factors,
reduce properly the amount
according to the true reasons
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everglades ev 215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everglades ev 215 in the language / languages: Dutch as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info