379757

Everglades ev 215 Manual

54
Zoom out
Zoom in
Previous page
1/64
Next page
54
GB
onto the drive shafts. Turn the kneaders clockwise until they click into place. It is recommended to ll
holes with heat-resisting margarine prior to placing the kneaders, this avoids the dough to stick below
the kneaders and the kneaders could be removed from bread easily.
2. Place ingredients into the bread pan. Please keep to the order mentioned in the recipe.
Usually the water or liquid substance should be put rstly, then add sugar, salt and our, always add
yeast or baking powder as the last ingredient. In case of heavy dough with high Rye or wholemeal
portion we advise to reverse the order of ingredients. i.e. to ll in rst the dry yeast and our, and nally
the liquid to get a better kneading result.
Note: for the maximum quantities of the our and yeast which may be used refer to the recipe.
3. With nger make a small indentation on one side of the our. Add yeast to indentation.
Make sure it does not come into contact with the liquid ingredients or salt.
4. Close the lid gently and plug the power cord into a wall outlet.
5. Press the MENU button until your desired program is selected.
6. Press the COLOR button to select the desired crust color.
7. Press the LOAF SIZE button to select the desired size (1.5LB or 2.0LB).
8. Set the delay time by pressing the “ ”or “ ” button. This step may be skipped if you want the bread
maker to start working immediately.
9. Press the START / STOP button to start working.
10. For the programs of BASIC, FRENCH, WHOLE WHEAT, SWEET and SANDWICH, a long beep sound
will be heard during operation. This is to prompt you to add ingredients. Open the lid and put in some
ingredients. It is possible that steam will escape through the vent slits in the lid during baking. This is
normal.
11. Once the process has been completed 10 beeps sound will be heard. You can press START / STOP
button for approx. 3-5 seconds to stop the process and take out the bread. Open the lid and while
using oven mitts, rmly grasp the bread pan handle. Turn the pan anticlockwise and gently pull the pan
straight up and out of the machine.
12. Use non-stick spatula to gently loosen the sides of the bread from the pan.
Caution: the Bread pan and bread may be very hot! Always handle with care and use oven mitts.
13. Turn bread pan upside down onto a clean cooking surface and gently shake until bread falls out onto
rack.
14. Remove the bread carefully from the pan and cool for about 20 minutes before slicing.
15. If you are out of the room or have not pressed START / STOP button at the end of operation, the bread
will be kept warm automatically for 1 hour and it will then stop further keeping warm.
16. When not in use or after completely operation, unplug the power cord.
Note: Before slicing the loaf, use the hook to remove out the Kneading blade hidden on the
bottom of loaf. The loaf is hot; never use the hand to remove the kneading blade.
SPECIAL INTRODUCTION
1. For Quick breads
Quick breads are made with baking powder and baking soda that is activated by moisture and heat.
For perfect quick breads, it is suggested that all liquids be placed at the bottom of the bread pan, dry
ingredients on top. During the initial mixing of quick bread batters and dry ingredients may collect in the
corners of the pan, it may be necessary to help machine mix avoid our clumps. If so, use a rubber
spatula.
2. About Ultra fast program
The bread maker can bake loaf within 1 hour with Ultra fast program. These 2 settings can bake bread
in 58 minute, and the bread is a little more dense in texture. Ultra fast I is for baking 1.5LB bread while
Ultra fast II is for 2.0LB. Please note that the water should be hot water at 48 - 50°C, and you must
use a cooking thermometer to measure the temperature. The water temperature is very critical to the
performance of baking. If the water temperature is too low the bread will not be rise to expected size;
if the water temperature is too high it will kill the yeast prior to rising, which also will largely affect the
baking performance.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Everglades ev 215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Everglades ev 215 in the language / languages: Dutch as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info